openwrt/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1...

231 lines
4.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "rtl838x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc";
model = "Netgear GS110TPP";
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
mode {
label = "reset";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio0 {
indirect-access-bus-id = <0>;
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x0e0000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0x00e0000 0x010000>;
};
partition@f0000 {
label = "sysinfo";
reg = <0x00f0000 0x010000>;
read-only;
};
partition@100000{
label = "jffs2_cfg";
reg = <0x0100000 0x100000>;
read-only;
};
partition@200000{
label = "jffs2_log";
reg = <0x0200000 0x100000>;
};
partition@300000{
label = "firmware";
compatible = "netgear,uimage";
reg = <0x0300000 0x1d00000>;
};
};
};
};
&ethernet0 {
mdio: mdio-bus {
compatible = "realtek,rtl838x-mdio";
regmap = <&ethernet0>;
#address-cells = <1>;
#size-cells = <0>;
/* Internal phy */
phy8: ethernet-phy@8 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <8>;
};
phy9: ethernet-phy@9 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <9>;
};
phy10: ethernet-phy@10 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <10>;
};
phy11: ethernet-phy@11 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <11>;
};
phy12: ethernet-phy@12 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <12>;
};
phy13: ethernet-phy@13 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <13>;
};
phy14: ethernet-phy@14 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <14>;
};
phy15: ethernet-phy@15 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <15>;
};
/* phy10: ethernet-phy@10 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <10>;
};
phy11: ethernet-phy@11 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <11>;
};
phy12: ethernet-phy@12 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <12>;
};
phy13: ethernet-phy@13 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <13>;
};*/
};
};
&switch0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@8 {
reg = <8>;
label = "lan1";
phy-handle = <&phy8>;
phy-mode = "internal";
};
port@9 {
reg = <9>;
label = "lan2";
phy-handle = <&phy9>;
phy-mode = "internal";
};
port@10 {
reg = <10>;
label = "lan3";
phy-handle = <&phy10>;
phy-mode = "internal";
};
port@11 {
reg = <11>;
label = "lan4";
phy-handle = <&phy11>;
phy-mode = "internal";
};
port@12 {
reg = <12>;
label = "lan5";
phy-handle = <&phy12>;
phy-mode = "internal";
};
port@13 {
reg = <13>;
label = "lan6";
phy-handle = <&phy13>;
phy-mode = "internal";
};
port@14 {
reg = <14>;
label = "lan7";
phy-handle = <&phy14>;
phy-mode = "internal";
};
port@15 {
reg = <15>;
label = "lan8";
phy-handle = <&phy15>;
phy-mode = "internal";
};
/* port@10 {
reg = <10>;
label = "lan9";
phy-mode = "internal";
phy-handle = <&phy10>;
};
port@11 {
reg = <11>;
label = "lan10";
phy-mode = "internal";
phy-handle = <&phy11>;
};
port@12 {
reg = <12>;
label = "lan11";
phy-mode = "internal";
phy-handle = <&phy12>;
};
port@13 {
reg = <13>;
label = "lan12";
phy-mode = "internal";
phy-handle = <&phy13>;
};*/
port@28 {
ethernet = <&ethernet0>;
reg = <28>;
phy-mode = "internal";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};