openwrt

mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2025-02-06 14:52:42 +00:00

OpenWrt Source Repository

Go to file

Piotr Dymacz db91418766 ath79: add support for TP-Link RE350K v1 TP-Link RE350K v1 (FCC ID: TE7RE350K) is a wall-plug AC1200 Wi-Fi range extender with 'Kasa Smart' support. Device is based on Qualcomm/Atheros QCA9558 + QCA9882 + AR8035 platform and is available only on US market. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of flash (SPI NOR) - 1x 1 Gbps Ethernet (AR8035) - 2T2R 2.4 GHz (QCA9558), with ext. PA (SE2565T) and LNA (SKY65971-11) - 2T2R 5 GHz (QCA9882), with ext. PA (SE5003L1-R) and LNA (SKY65981-11) - 2x U.FL connector on PCB - 2x dual-band PCB antennas - 1x LED, 2x dual-color LED (all driven by GPIO) - 3x button (app config, led, reset) - 1x mechanical on/off slide switch - 1x UART (4-pin, 2.54 mm pitch) header on PCB - 1x JTAG (8-pin, 1.27 mm pitch) header on PCB Flash instruction: Use 'factory' image directly in vendor GUI (default IP: 192.168.0.254, default credentials: admin/admin). Warning: This device does not include any kind of recovery mechanism in U-Boot. Vendor firmware access: You can access vendor firmware over serial (RX line requires jumper resistor in R306 place, near XTAL) with: root/sohoadmin credentials. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2019-03-11 22:00:26 +01:00
.github	build: Update README & github help	2018-07-08 09:41:53 +01:00
config	build: remove leftovers from previous x86 commits	2019-02-17 18:22:40 +01:00
include	IB: include SUPPORTED_DEVICES in 'make info' output	2019-03-11 05:32:29 +01:00
package	uboot-envtools: ramips: add support for ALFA Network Tube-E4G	2019-03-11 22:00:26 +01:00
scripts	IB: include SUPPORTED_DEVICES in 'make info' output	2019-03-11 05:32:29 +01:00
target	ath79: add support for TP-Link RE350K v1	2019-03-11 22:00:26 +01:00
toolchain	toolchain/binutils: Add binutils 2.32	2019-02-26 23:20:04 +01:00
tools	ath79: add support for TP-Link RE350K v1	2019-03-11 22:00:26 +01:00
.gitattributes
.gitignore	.gitignore: add .project & .cproject for eclipse users	2018-01-17 11:07:17 +01:00
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile	build: Unset CDPATH to avoid problems	2018-08-25 11:10:28 +02:00
README	build: README punctuation pendantry	2018-07-08 12:05:16 +01:00
rules.mk	librpc: remove package	2019-01-22 13:29:46 +01:00

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org