231 lines
5.3 KiB
Diff
231 lines
5.3 KiB
Diff
From 9962cb9be2db877c232aaf00db40125c0d7bf4bc Mon Sep 17 00:00:00 2001
|
|
From: Chukun Pan <amadeus@jmu.edu.cn>
|
|
Date: Mon, 17 May 2021 00:35:22 +0800
|
|
Subject: [PATCH] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
|
|
|
|
The NanoPi R1S H5 is a open source board made by FriendlyElec.
|
|
It has the following features:
|
|
|
|
- Allwinner H5, Quad-core Cortex-A53
|
|
- 512MB DDR3 RAM
|
|
- 10/100/1000M Ethernet x 2
|
|
- RTL8189ETV WiFi 802.11b/g/n
|
|
- USB 2.0 host port (A)
|
|
- MicroSD Slot
|
|
- Serial Debug Port
|
|
- 5V 2A DC power-supply
|
|
|
|
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
|
|
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Link: https://lore.kernel.org/r/20210516163523.9484-2-amadeus@jmu.edu.cn
|
|
---
|
|
arch/arm64/boot/dts/allwinner/Makefile | 1 +
|
|
.../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 195 ++++++++++++++++++
|
|
2 files changed, 196 insertions(+)
|
|
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
|
|
|
|
--- a/arch/arm64/boot/dts/allwinner/Makefile
|
|
+++ b/arch/arm64/boot/dts/allwinner/Makefile
|
|
@@ -24,6 +24,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-li
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
|
|
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
|
|
@@ -0,0 +1,191 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
|
|
+ *
|
|
+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
|
|
+ * Copyright (C) 2017 Antony Antony <antony@phenome.org>
|
|
+ * Copyright (C) 2016 ARM Ltd.
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+#include "sun50i-h5.dtsi"
|
|
+#include "sun50i-h5-cpu-opp.dtsi"
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/input/input.h>
|
|
+
|
|
+/ {
|
|
+ model = "FriendlyARM NanoPi R1S H5";
|
|
+ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
|
|
+
|
|
+ aliases {
|
|
+ ethernet0 = &emac;
|
|
+ ethernet1 = &rtl8189etv;
|
|
+ serial0 = &uart0;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ sys {
|
|
+ label = "nanopi:red:sys";
|
|
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ };
|
|
+
|
|
+ lan {
|
|
+ label = "nanopi:green:lan";
|
|
+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ wan {
|
|
+ label = "nanopi:green:wan";
|
|
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ r-gpio-keys {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ reset {
|
|
+ label = "reset";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ reg_gmac_3v3: gmac-3v3 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "gmac-3v3";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ startup-delay-us = <100000>;
|
|
+ enable-active-high;
|
|
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ reg_vcc3v3: vcc3v3 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ };
|
|
+
|
|
+ reg_usb0_vbus: usb0-vbus {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "usb0-vbus";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ enable-active-high;
|
|
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ vdd_cpux: gpio-regulator {
|
|
+ compatible = "regulator-gpio";
|
|
+ regulator-name = "vdd-cpux";
|
|
+ regulator-type = "voltage";
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <1100000>;
|
|
+ regulator-max-microvolt = <1300000>;
|
|
+ regulator-ramp-delay = <50>; /* 4ms */
|
|
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
|
|
+ gpios-states = <0x1>;
|
|
+ states = <1100000 0x0>, <1300000 0x1>;
|
|
+ };
|
|
+
|
|
+ wifi_pwrseq: wifi_pwrseq {
|
|
+ compatible = "mmc-pwrseq-simple";
|
|
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
|
|
+ post-power-on-delay-ms = <200>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <&vdd_cpux>;
|
|
+};
|
|
+
|
|
+&ehci1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ehci2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&emac {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&emac_rgmii_pins>;
|
|
+ phy-supply = <®_gmac_3v3>;
|
|
+ phy-handle = <&ext_rgmii_phy>;
|
|
+ phy-mode = "rgmii-id";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&external_mdio {
|
|
+ ext_rgmii_phy: ethernet-phy@7 {
|
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
+ reg = <7>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ status = "okay";
|
|
+
|
|
+ eeprom@51 {
|
|
+ compatible = "microchip,24c02";
|
|
+ reg = <0x51>;
|
|
+ pagesize = <16>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&mmc0 {
|
|
+ vmmc-supply = <®_vcc3v3>;
|
|
+ bus-width = <4>;
|
|
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&mmc1 {
|
|
+ vmmc-supply = <®_vcc3v3>;
|
|
+ vqmmc-supply = <®_vcc3v3>;
|
|
+ mmc-pwrseq = <&wifi_pwrseq>;
|
|
+ bus-width = <4>;
|
|
+ non-removable;
|
|
+ status = "okay";
|
|
+
|
|
+ rtl8189etv: sdio_wifi@1 {
|
|
+ reg = <1>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&ohci1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart0_pa_pins>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_otg {
|
|
+ dr_mode = "peripheral";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbphy {
|
|
+ /* USB Type-A port's VBUS is always on */
|
|
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
|
|
+ usb0_vbus-supply = <®_usb0_vbus>;
|
|
+ status = "okay";
|
|
+};
|