123 lines
3.8 KiB
Diff
123 lines
3.8 KiB
Diff
--- a/drivers/pci/controller/Kconfig
|
|
+++ b/drivers/pci/controller/Kconfig
|
|
@@ -48,6 +48,11 @@ config PCIE_CADENCE_EP
|
|
endpoint mode. This PCIe controller may be embedded into many
|
|
different vendors SoCs.
|
|
|
|
+config PCIE_OXNAS
|
|
+ bool "PLX Oxnas PCIe controller"
|
|
+ depends on ARCH_OXNAS
|
|
+ select PCIEPORTBUS
|
|
+
|
|
endmenu
|
|
|
|
config PCIE_XILINX_NWL
|
|
--- a/drivers/pci/controller/Makefile
|
|
+++ b/drivers/pci/controller/Makefile
|
|
@@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-r
|
|
obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
|
|
obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
|
|
obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
|
|
+obj-$(CONFIG_PCIE_OXNAS) += pcie-oxnas.o
|
|
obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
|
|
obj-$(CONFIG_VMD) += vmd.o
|
|
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
|
|
--- a/arch/arm/boot/dts/ox820.dtsi
|
|
+++ b/arch/arm/boot/dts/ox820.dtsi
|
|
@@ -289,7 +289,7 @@
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
- ranges = <0 0x47000000 0x1000000>;
|
|
+ ranges = <0 0x47000000 0x2000>;
|
|
|
|
scu: scu@0 {
|
|
compatible = "arm,arm11mp-scu";
|
|
@@ -318,5 +318,86 @@
|
|
<0x100 0x500>;
|
|
};
|
|
};
|
|
+
|
|
+ pcie0: pcie-controller@47c00000 {
|
|
+ compatible = "plxtech,nas782x-pcie";
|
|
+ device_type = "pci";
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ /* flag & space bus address host address size */
|
|
+ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000
|
|
+ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000
|
|
+ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000
|
|
+ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>;
|
|
+
|
|
+ bus-range = <0x00 0x7f>;
|
|
+
|
|
+ /* cfg inbound translator */
|
|
+ reg = <0x47c00000 0x1000>, <0x47d00000 0x100>;
|
|
+
|
|
+ phys = <&pcie_phy>;
|
|
+ phy-names = "pcie-phy";
|
|
+
|
|
+ #interrupt-cells = <1>;
|
|
+ /* wild card mask, match all bus address & interrupt specifier */
|
|
+ /* format: bus address mask, interrupt specifier mask */
|
|
+ /* each bit 1 means need match, 0 means ignored when match */
|
|
+ interrupt-map-mask = <0 0 0 0>;
|
|
+ /* format: a list of: bus address, interrupt specifier,
|
|
+ * parent interrupt controller & specifier */
|
|
+ interrupt-map = <0 0 0 0 &gic 0 19 0x304>;
|
|
+ gpios = <&gpio1 12 0>;
|
|
+ clocks = <&stdclk CLK_820_PCIEA>, <&pllb>;
|
|
+ clock-names = "pcie", "busclk";
|
|
+ resets = <&reset RESET_PCIEA>;
|
|
+ reset-names = "pcie";
|
|
+
|
|
+ plxtech,pcie-hcsl-bit = <2>;
|
|
+ plxtech,pcie-ctrl-offset = <0x120>;
|
|
+ plxtech,pcie-outbound-offset = <0x138>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ pcie1: pcie-controller@47e00000 {
|
|
+ compatible = "plxtech,nas782x-pcie";
|
|
+ device_type = "pci";
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ /* flag & space bus address host address size */
|
|
+ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000
|
|
+ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000
|
|
+ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000
|
|
+ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>;
|
|
+
|
|
+ bus-range = <0x80 0xff>;
|
|
+
|
|
+ /* cfg inbound translator */
|
|
+ reg = <0x47e00000 0x1000>, <0x47f00000 0x100>;
|
|
+
|
|
+ phys = <&pcie_phy>;
|
|
+ phy-names = "pcie-phy";
|
|
+
|
|
+ #interrupt-cells = <1>;
|
|
+ /* wild card mask, match all bus address & interrupt specifier */
|
|
+ /* format: bus address mask, interrupt specifier mask */
|
|
+ /* each bit 1 means need match, 0 means ignored when match */
|
|
+ interrupt-map-mask = <0 0 0 0>;
|
|
+ /* format: a list of: bus address, interrupt specifier,
|
|
+ * parent interrupt controller & specifier */
|
|
+ interrupt-map = <0 0 0 0 &gic 0 20 0x304>;
|
|
+
|
|
+ /* gpios = <&gpio1 12 0>; */
|
|
+ clocks = <&stdclk CLK_820_PCIEB>, <&pllb>;
|
|
+ clock-names = "pcie", "busclk";
|
|
+ resets = <&reset RESET_PCIEB>;
|
|
+ reset-names = "pcie";
|
|
+
|
|
+ plxtech,pcie-hcsl-bit = <3>;
|
|
+ plxtech,pcie-ctrl-offset = <0x124>;
|
|
+ plxtech,pcie-outbound-offset = <0x174>;
|
|
+ status = "disabled";
|
|
+ };
|
|
};
|
|
};
|