mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-30 10:32:07 +00:00
73de41898f
Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac (Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work currently as there is no driver. Related: https://github.com/openwrt/openwrt/pull/5084 For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2. Specifications: * MT7629, 256 MiB RAM, 16 MiB SPI NOR * MT7761N (2.4GHz) / MT7762N (5GHz) - no driver * Ethernet: 1 port 10/100/1000 * UART: 115200 baud (labeled on board) Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * After installation, perform a factory reset. Wait for the device to boot, then hold the reset button for 10 seconds. This is needed because sysupgrade in the stock firmware will attempt to preserve its configuration using sysupgrade.tgz. See https://github.com/openwrt/openwrt/pull/4182 Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
51 lines
1.6 KiB
Makefile
51 lines
1.6 KiB
Makefile
define Device/mediatek_mt7629-rfb
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7629 rfb AP
|
|
DEVICE_DTS := mt7629-rfb
|
|
DEVICE_PACKAGES := swconfig
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7629-rfb
|
|
|
|
define Device/iptime_a6004mx
|
|
DEVICE_VENDOR := ipTIME
|
|
DEVICE_MODEL := A6004MX
|
|
DEVICE_DTS := mt7629-iptime-a6004mx
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-usb3 uboot-envtools
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL := $$(KERNEL) | pad-offset 128k 2048 | iptime-crc32 a6004mx
|
|
KERNEL_INITRAMFS := $$(KERNEL_INITRAMFS) | pad-offset 128k 2048 | iptime-crc32 a6004mx
|
|
IMAGES += recovery.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/recovery.bin := append-kernel | pad-to 128k | append-ubi | append-metadata
|
|
endef
|
|
TARGET_DEVICES += iptime_a6004mx
|
|
|
|
define Device/netgear_ex6250-v2
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := EX6250
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_ALT0_VENDOR := NETGEAR
|
|
DEVICE_ALT0_MODEL := EX6400
|
|
DEVICE_ALT0_VARIANT := v3
|
|
DEVICE_ALT1_VENDOR := NETGEAR
|
|
DEVICE_ALT1_MODEL := EX6410
|
|
DEVICE_ALT1_VARIANT := v2
|
|
DEVICE_ALT2_VENDOR := NETGEAR
|
|
DEVICE_ALT2_MODEL := EX6470
|
|
DEVICE_DTS := mt7629-netgear-ex6250-v2
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := uboot-envtools
|
|
NETGEAR_ENC_MODEL := EX6250v2
|
|
NETGEAR_ENC_REGION := US
|
|
NETGEAR_ENC_HW_ID_LIST := 1010000003630000_NETGEAR;1010000003540000_NETGEAR
|
|
NETGEAR_ENC_MODEL_LIST := EX6250v2;EX6400v3;EX6470;EX6410v2
|
|
IMAGE_SIZE := 13120k
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to 128k | append-rootfs | \
|
|
pad-rootfs | check-size | netgear-encrypted-factory
|
|
endef
|
|
TARGET_DEVICES += netgear_ex6250-v2
|