openwrt/scripts
Markus Stockhausen d03f3dcf3b realtek: add support for Linksys LGS310C
Hardware specification
----------------------

* RTL8380M SoC, 1 MIPS 4KEc core @ 500MHz
* 256MB DRAM
* 32MB NOR Flash
* 8 x 10/100/1000BASE-T ports
* 2 x SFP ports
* Power LED, Fault LED
* Reset button on front panel
* UART (115200 8N1) via populated standard pin header marked JP1

TODO: The SFP ports use a shared SCL GPIO that the driver cannot handle.
The left SFP port (lan9) is defined and fully functional while the laser
on the right SFP port (lan10) is off by default.

UART pinout
-----------

[o]ooo|JP1
 | ||`------ GND
 | |`------- RX
 | `-------- TX
 `---------- Vcc (3V3)

Installation using OEM webinterface
-----------------------------------

1. Make sure you are running OEM firmware in secondary slot
2. Install squashfs-factory.imag to primary slot by upload via http

Installation using serial interface
-----------------------------------

1. Press "a" "c" "p" during message "Enter correct key to stop autoboot"
2. Load image with "upgrade runtime <TFTP IP>:squashfs-sysupgrade.bin" command
3. Switch to primary slot with "setsys bootpartition 0"
4. Store config with "savesys"
5. Boot the image with `boota` command

Dual-boot with stock firmware using writable u-boot-env
-------------------------------------------------------

From stock to OpenWrt / primary image 1 (CLI as admin):
   - > boot system image1
   - > reboot

From OpenWrt to stock / boot image 2: (shell as root)
   - # fw_setsys bootpartition 1
   - # reboot

Debrick using serial interface
------------------------------

1. Press "a" "c" "p" during message "Enter correct key to stop autoboot"
2. Load vendor image with "upgrade runtime <TFTP IP>:LGS310xxxxx.imag"
3. switch to primary partition "setsys bootpartition 0"
4. safe config "savesys"

Further documentation
---------------------
See https://openwrt.org/toh/linksys/lgs352c

It has been developed and tested on device with v1 revision.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/16068
[Add missing 'w' in name of firmware partition]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2024-10-02 20:15:21 +02:00
..
config build: scripts/config - update to kconfig-v6.6.16 2024-03-01 19:02:00 +01:00
flashing
belkin-header.py realtek: add support for Linksys LGS310C 2024-10-02 20:15:21 +02:00
brcmImage.pl
bundle-libraries.sh
cameo-imghdr.py
cameo-tag.py
cfe-bin-header.py
cfe-partition-tag.py
cfe-wfi-tag.py
check-toolchain-clean.sh
checkpatch.pl
clean-package.sh
cleanfile
cleanpatch
combined-ext-image.sh
combined-image.sh
command_all.sh
config.guess scripts: config.guess: update to 2024-07-27 2024-09-28 22:48:47 +02:00
config.rpath
config.sub scripts: config.guess: update to 2024-07-27 2024-09-28 22:48:47 +02:00
const_structs.checkpatch
deptest.sh
diffconfig.sh
dl_cleanup.py scripts: add .tar.zst to dl_cleanup extensions 2024-04-06 17:07:32 +03:00
dl_github_archive.py scripts/dl_github_archive: use tar -I for ZSTD 2024-04-09 18:39:36 +02:00
download.pl scripts/download.pl: fix broken link for KERNEL projects 2024-06-19 14:30:06 +02:00
dump-target-info.pl scripts/dump-target-info.pl: add new function to DUMP devices 2023-11-15 10:59:23 +01:00
env
ext-toolchain.sh scripts/ext-toolchain: add missing libc library specs 2024-06-17 13:24:03 +02:00
ext-tools.sh
feeds scripts/feeds: Support feed update with git pull --rebase --autostash 2024-09-08 18:54:42 +02:00
fixup-makefile.pl
functions.sh
gen-dependencies.sh
gen_image_generic.sh
get_source_date_epoch.sh build: add explicit --no-show-signature for git 2024-02-20 20:57:53 +01:00
getver.sh scripts: fix revision calculation using new "main" branch 2024-05-21 17:53:33 +02:00
ipkg-build scripts: fix installed-size calculation 2024-01-08 14:08:06 +01:00
ipkg-make-index.sh
ipkg-remove
json_add_image_info.py build: fix generation of large .vdi images 2023-07-15 17:02:42 +02:00
json_overview_image_info.py build: ensure silent Make behavior for json scripts 2024-01-05 16:25:14 +01:00
kconfig.pl
kernel_bump.sh scripts/kernel_bump: Fix commit text formatting 2024-04-29 00:24:02 +02:00
linksys-image.sh realtek: add support for Linksys LGS310C 2024-10-02 20:15:21 +02:00
make-ipkg-dir.sh
md5sum
metadata.pm packages: store URL in Manifest 2024-01-08 14:06:38 +01:00
mkhash.c
mkits-qsdk-ipq-image.sh
mkits-zyxel-fit-filogic.sh mediatek: add support for ZyXEL NWA50AX Pro 2023-07-21 20:28:13 +02:00
mkits-zyxel-fit.sh
mkits.sh scripts/mkits.sh: DT overlays don't need a loadaddr 2023-07-12 19:02:08 +01:00
moxa-encode-fw.py ath79: Add support for MOXA AWK-1137C 2023-06-25 12:59:26 +02:00
netgear-encrypted-factory.py image: add additional fields to Netgear encrypted image 2023-07-01 14:42:11 +02:00
noop.sh build: replace `true` with a custom noop script 2023-11-03 23:06:07 +01:00
om-fwupgradecfg-gen.sh
package-metadata.pl build: add explicit timezone in CycloneDX SBOM 2024-06-07 12:05:49 +02:00
pad_image
patch-kernel.sh build: fix shebang line 2024-02-28 12:31:33 +08:00
patch-specs.sh
portable_date.sh
projectsmirrors.json scripts/download.pl: detach mirror URLs from script file 2024-06-18 19:51:45 +02:00
qemustart scripts: qemustart: Fix x86/legacy bootup 2023-08-14 23:37:04 +02:00
redboot-script.pl
relink-lib.sh
remote-gdb
rstrip.sh scripts/rstrip.sh: ignore /lib/firmware 2024-01-22 13:01:31 +01:00
sercomm-crypto.py
sercomm-kernel-header.py scripts: sercomm-kernel-header.py: improve compatibility 2023-06-11 13:36:38 +08:00
sercomm-partition-tag.py
sercomm-payload.py
sercomm-pid.py scripts: sercomm-pid.py: use uppercase hwid in pid 2023-11-25 01:11:18 +01:00
sign_images.sh
size_compare.sh
slugimage.pl
spelling.txt
srecimage.pl
strip-kmod.sh
symlink-tree.sh
sysupgrade-tar.sh
target-metadata.pl
time.pl
timestamp.pl
ubinize-image.sh scripts: ubinize-image.sh: fix support for static volume 2024-04-24 02:32:22 +01:00
xxdi.pl