openwrt/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts
Adrian Schmutzler dec4a028ab rtl838x: remove model name from LED labels
Like in the previous patches for various targets, this removes
the "devicename" from LED labels in rtl838x, as it's useless and
only creates complexity.

Since the target is fresh and so far only system LEDs were added,
this does not add a migration script.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-15 17:54:31 +02:00

336 lines
6.0 KiB
Plaintext

#include "rtl838x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc";
model = "D-Link DGS-1210-16";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "green:power";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
};
};
&gpio0 {
indirect-access-bus-id = <0>;
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x80000>;
read-only;
};
partition@80000 {
label = "u-boot-env";
reg = <0x00080000 0x40000>;
read-only;
};
partition@c0000 {
label = "u-boot-env2";
reg = <0x000c0000 0x40000>;
read-only;
};
partition@280000 {
label = "firmware";
compatible = "denx,uimage";
reg = <0x00100000 0xd80000>;
};
partition@be80000 {
label = "kernel2";
reg = <0x00e80000 0x180000>;
};
partition@1000000 {
label = "sysinfo";
reg = <0x01000000 0x40000>;
};
partition@1040000 {
label = "rootfs2";
reg = <0x01040000 0xc00000>;
};
partition@1c40000 {
label = "jffs2";
reg = <0x01c40000 0x3c0000>;
};
};
};
};
&ethernet0 {
mdio: mdio-bus {
compatible = "realtek,rtl838x-mdio";
regmap = <&ethernet0>;
#address-cells = <1>;
#size-cells = <0>;
/* External phy RTL8218B */
phy0: ethernet-phy@0 {
reg = <0>;
compatible = "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <1>;
compatible = "ethernet-phy-ieee802.3-c22";
};
phy2: ethernet-phy@2 {
reg = <2>;
compatible = "ethernet-phy-ieee802.3-c22";
};
phy3: ethernet-phy@3 {
reg = <3>;
compatible = "ethernet-phy-ieee802.3-c22";
};
phy4: ethernet-phy@4 {
reg = <4>;
compatible = "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <5>;
compatible = "ethernet-phy-ieee802.3-c22";
};
phy6: ethernet-phy@6 {
reg = <6>;
compatible = "ethernet-phy-ieee802.3-c22";
};
phy7: ethernet-phy@7 {
reg = <7>;
compatible = "ethernet-phy-ieee802.3-c22";
};
/* Internal phy RTL8218B */
phy8: ethernet-phy@8 {
reg = <8>;
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
};
phy9: ethernet-phy@9 {
reg = <9>;
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
};
phy10: ethernet-phy@10 {
reg = <10>;
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
};
phy11: ethernet-phy@11 {
reg = <11>;
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
};
phy12: ethernet-phy@12 {
reg = <12>;
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
};
phy13: ethernet-phy@13 {
reg = <13>;
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
};
phy14: ethernet-phy@14 {
reg = <14>;
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
};
phy15: ethernet-phy@15 {
reg = <15>;
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
};
/* External phy: RTL8214FC */
phy24: ethernet-phy@24 {
compatible = "ethernet-phy-ieee802.3-c22";
sfp;
media = "fibre";
reg = <24>;
};
phy25: ethernet-phy@25 {
compatible = "ethernet-phy-ieee802.3-c22";
sfp;
media = "fibre";
reg = <25>;
};
phy26: ethernet-phy@26 {
compatible = "ethernet-phy-ieee802.3-c22";
sfp;
media = "fibre";
reg = <26>;
};
phy27: ethernet-phy@27 {
compatible = "ethernet-phy-ieee802.3-c22";
sfp;
media = "fibre";
reg = <27>;
};
};
};
&switch0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
phy-handle = <&phy0>;
phy-mode = "qsgmii";
};
port@1 {
reg = <1>;
label = "lan2";
phy-handle = <&phy1>;
phy-mode = "qsgmii";
};
port@2 {
reg = <2>;
label = "lan3";
phy-handle = <&phy2>;
phy-mode = "qsgmii";
};
port@3 {
reg = <3>;
label = "lan4";
phy-handle = <&phy3>;
phy-mode = "qsgmii";
};
port@4 {
reg = <4>;
label = "lan5";
phy-handle = <&phy4>;
phy-mode = "qsgmii";
};
port@5 {
reg = <5>;
label = "lan6";
phy-handle = <&phy5>;
phy-mode = "qsgmii";
};
port@6 {
reg = <6>;
label = "lan7";
phy-handle = <&phy6>;
phy-mode = "qsgmii";
};
port@7 {
reg = <7>;
label = "lan8";
phy-handle = <&phy7>;
phy-mode = "qsgmii";
};
port@8 {
reg = <8>;
label = "lan9";
phy-handle = <&phy8>;
phy-mode = "internal";
};
port@9 {
reg = <9>;
label = "lan10";
phy-handle = <&phy9>;
phy-mode = "internal";
};
port@10 {
reg = <10>;
label = "lan11";
phy-handle = <&phy10>;
phy-mode = "internal";
};
port@11 {
reg = <11>;
label = "lan12";
phy-handle = <&phy11>;
phy-mode = "internal";
};
port@12 {
reg = <12>;
label = "lan13";
phy-handle = <&phy12>;
phy-mode = "internal";
};
port@13 {
reg = <13>;
label = "lan14";
phy-handle = <&phy13>;
phy-mode = "internal";
};
port@14 {
reg = <14>;
label = "lan15";
phy-handle = <&phy14>;
phy-mode = "internal";
};
port@15 {
reg = <15>;
label = "lan16";
phy-handle = <&phy15>;
phy-mode = "internal";
};
port@24 {
reg = <24>;
label = "lan17";
phy-handle = <&phy24>;
phy-mode = "qsgmii";
};
port@25 {
reg = <25>;
label = "lan18";
phy-handle = <&phy25>;
phy-mode = "qsgmii";
};
port@26 {
reg = <26>;
label = "lan19";
phy-handle = <&phy26>;
phy-mode = "qsgmii";
};
port@27 {
reg = <27>;
label = "lan20";
phy-handle = <&phy27>;
phy-mode = "qsgmii";
};
port@28 {
ethernet = <&ethernet0>;
reg = <28>;
phy-mode = "internal";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};