225 lines
5.7 KiB
Diff
225 lines
5.7 KiB
Diff
--- a/arch/mips/include/asm/mach-ralink/mt7621.h
|
|
+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
|
|
@@ -17,6 +17,10 @@
|
|
#define SYSC_REG_CHIP_REV 0x0c
|
|
#define SYSC_REG_SYSTEM_CONFIG0 0x10
|
|
#define SYSC_REG_SYSTEM_CONFIG1 0x14
|
|
+#define SYSC_REG_CLKCFG0 0x2c
|
|
+#define SYSC_REG_CUR_CLK_STS 0x44
|
|
+
|
|
+#define MEMC_REG_CPU_PLL 0x648
|
|
|
|
#define CHIP_REV_PKG_MASK 0x1
|
|
#define CHIP_REV_PKG_SHIFT 16
|
|
@@ -24,6 +28,22 @@
|
|
#define CHIP_REV_VER_SHIFT 8
|
|
#define CHIP_REV_ECO_MASK 0xf
|
|
|
|
+#define XTAL_MODE_SEL_MASK 0x7
|
|
+#define XTAL_MODE_SEL_SHIFT 6
|
|
+
|
|
+#define CPU_CLK_SEL_MASK 0x3
|
|
+#define CPU_CLK_SEL_SHIFT 30
|
|
+
|
|
+#define CUR_CPU_FDIV_MASK 0x1f
|
|
+#define CUR_CPU_FDIV_SHIFT 8
|
|
+#define CUR_CPU_FFRAC_MASK 0x1f
|
|
+#define CUR_CPU_FFRAC_SHIFT 0
|
|
+
|
|
+#define CPU_PLL_PREDIV_MASK 0x3
|
|
+#define CPU_PLL_PREDIV_SHIFT 12
|
|
+#define CPU_PLL_FBDIV_MASK 0x7f
|
|
+#define CPU_PLL_FBDIV_SHIFT 4
|
|
+
|
|
#define MT7621_DRAM_BASE 0x0
|
|
#define MT7621_DDR2_SIZE_MIN 32
|
|
#define MT7621_DDR2_SIZE_MAX 256
|
|
--- a/arch/mips/ralink/mt7621.c
|
|
+++ b/arch/mips/ralink/mt7621.c
|
|
@@ -8,6 +8,10 @@
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/jiffies.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/clkdev.h>
|
|
+#include <linux/clk-provider.h>
|
|
+#include <dt-bindings/clock/mt7621-clk.h>
|
|
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/smp-ops.h>
|
|
@@ -16,16 +20,12 @@
|
|
#include <asm/mach-ralink/mt7621.h>
|
|
#include <asm/mips-boards/launch.h>
|
|
#include <asm/delay.h>
|
|
+#include <asm/time.h>
|
|
|
|
#include <pinmux.h>
|
|
|
|
#include "common.h"
|
|
|
|
-#define SYSC_REG_SYSCFG 0x10
|
|
-#define SYSC_REG_CPLL_CLKCFG0 0x2c
|
|
-#define SYSC_REG_CUR_CLK_STS 0x44
|
|
-#define CPU_CLK_SEL (BIT(30) | BIT(31))
|
|
-
|
|
#define MT7621_GPIO_MODE_UART1 1
|
|
#define MT7621_GPIO_MODE_I2C 2
|
|
#define MT7621_GPIO_MODE_UART3_MASK 0x3
|
|
@@ -111,49 +111,89 @@ static struct rt2880_pmx_group mt7621_pi
|
|
{ 0 }
|
|
};
|
|
|
|
+static struct clk *clks[MT7621_CLK_MAX];
|
|
+static struct clk_onecell_data clk_data = {
|
|
+ .clks = clks,
|
|
+ .clk_num = ARRAY_SIZE(clks),
|
|
+};
|
|
+
|
|
phys_addr_t mips_cpc_default_phys_base(void)
|
|
{
|
|
panic("Cannot detect cpc address");
|
|
}
|
|
|
|
-void __init ralink_clk_init(void)
|
|
+static struct clk *__init mt7621_add_sys_clkdev(
|
|
+ const char *id, unsigned long rate)
|
|
{
|
|
- int cpu_fdiv = 0;
|
|
- int cpu_ffrac = 0;
|
|
- int fbdiv = 0;
|
|
- u32 clk_sts, syscfg;
|
|
- u8 clk_sel = 0, xtal_mode;
|
|
- u32 cpu_clk;
|
|
+ struct clk *clk;
|
|
+ int err;
|
|
+
|
|
+ clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
|
|
+ if (IS_ERR(clk))
|
|
+ panic("failed to allocate %s clock structure", id);
|
|
+
|
|
+ err = clk_register_clkdev(clk, id, NULL);
|
|
+ if (err)
|
|
+ panic("unable to register %s clock device", id);
|
|
|
|
- if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
|
|
- clk_sel = 1;
|
|
+ return clk;
|
|
+}
|
|
+
|
|
+void __init ralink_clk_init(void)
|
|
+{
|
|
+ u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
|
|
+ u32 pll, prediv, fbdiv;
|
|
+ u32 xtal_clk, cpu_clk, bus_clk;
|
|
+ const static u32 prediv_tbl[] = {0, 1, 2, 2};
|
|
+
|
|
+ syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
|
|
+ xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
|
|
+
|
|
+ clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0);
|
|
+ clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK;
|
|
+
|
|
+ curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
|
|
+ ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK;
|
|
+ ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK;
|
|
+
|
|
+ if (xtal_sel <= 2)
|
|
+ xtal_clk = 20 * 1000 * 1000;
|
|
+ else if (xtal_sel <= 5)
|
|
+ xtal_clk = 40 * 1000 * 1000;
|
|
+ else
|
|
+ xtal_clk = 25 * 1000 * 1000;
|
|
|
|
switch (clk_sel) {
|
|
case 0:
|
|
- clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
|
|
- cpu_fdiv = ((clk_sts >> 8) & 0x1F);
|
|
- cpu_ffrac = (clk_sts & 0x1F);
|
|
- cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
|
|
+ cpu_clk = 500 * 1000 * 1000;
|
|
break;
|
|
-
|
|
case 1:
|
|
- fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
|
|
- syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
|
|
- xtal_mode = (syscfg >> 6) & 0x7;
|
|
- if (xtal_mode >= 6) {
|
|
- /* 25Mhz Xtal */
|
|
- cpu_clk = 25 * fbdiv * 1000 * 1000;
|
|
- } else if (xtal_mode >= 3) {
|
|
- /* 40Mhz Xtal */
|
|
- cpu_clk = 40 * fbdiv * 1000 * 1000;
|
|
- } else {
|
|
- /* 20Mhz Xtal */
|
|
- cpu_clk = 20 * fbdiv * 1000 * 1000;
|
|
- }
|
|
+ pll = rt_memc_r32(MEMC_REG_CPU_PLL);
|
|
+ fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK;
|
|
+ prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK;
|
|
+ cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv];
|
|
break;
|
|
+ default:
|
|
+ cpu_clk = xtal_clk;
|
|
}
|
|
+
|
|
+ cpu_clk = cpu_clk / ffiv * ffrac;
|
|
+ bus_clk = cpu_clk / 4;
|
|
+
|
|
+ clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk);
|
|
+ clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk);
|
|
+
|
|
+ pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000);
|
|
+ mips_hpt_frequency = cpu_clk / 2;
|
|
}
|
|
|
|
+static void __init mt7621_clocks_init_dt(struct device_node *np)
|
|
+{
|
|
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
|
|
+}
|
|
+
|
|
+CLK_OF_DECLARE(ar7100, "mediatek,mt7621-pll", mt7621_clocks_init_dt);
|
|
+
|
|
void __init ralink_of_remap(void)
|
|
{
|
|
rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
|
|
--- a/arch/mips/ralink/timer-gic.c
|
|
+++ b/arch/mips/ralink/timer-gic.c
|
|
@@ -9,14 +9,14 @@
|
|
|
|
#include <linux/of.h>
|
|
#include <linux/clk-provider.h>
|
|
-#include <linux/clocksource.h>
|
|
+#include <asm/time.h>
|
|
|
|
#include "common.h"
|
|
|
|
void __init plat_time_init(void)
|
|
{
|
|
ralink_of_remap();
|
|
-
|
|
+ ralink_clk_init();
|
|
of_clk_init(NULL);
|
|
timer_probe();
|
|
}
|
|
--- /dev/null
|
|
+++ b/include/dt-bindings/clock/mt7621-clk.h
|
|
@@ -0,0 +1,18 @@
|
|
+/*
|
|
+ * Copyright (C) 2018 Weijie Gao <hackpascal@gmail.com>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#ifndef __DT_BINDINGS_MT7621_CLK_H
|
|
+#define __DT_BINDINGS_MT7621_CLK_H
|
|
+
|
|
+#define MT7621_CLK_CPU 0
|
|
+#define MT7621_CLK_BUS 1
|
|
+
|
|
+#define MT7621_CLK_MAX 2
|
|
+
|
|
+#endif /* __DT_BINDINGS_MT7621_CLK_H */
|