openwrt/package/kernel/ath10k-ct/Makefile
Sven Eckelmann ba249bc955 ath10k-ct: fix incorrect multicast/broadcast rate setting
If no mcast_rate is set for the wifi-iface then there is no rate_idx (0)
set for the bss. This can break for example 5GHz meshpoint interfaces
because 0 maps to a CCK rate (11Mbit/s).

It must also be avoided that the ath10k-ct internal state for the rates is
not synced with the mac80211 rates state. Otherwise, the user specified
rate (e.g. a wifi-iface mcast_rate for a meshpoint interface) will only be
set on startup. And a short while after that, ath10k-ct specific code in
ath10k_check_apply_special_rates is missing a valid rate in its own
structures and is then recalculating a new default rate. This default rate
is in most situations not the requested rate.

Fixes: 4df3c71cd4 ("ath10k-ct: Update to 2018-12-11 and use version based on 4.19")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2019-02-26 23:20:04 +01:00

110 lines
3.0 KiB
Makefile

include $(TOPDIR)/rules.mk
PKG_NAME:=ath10k-ct
PKG_RELEASE=3
PKG_LICENSE:=GPLv2
PKG_LICENSE_FILES:=
PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
PKG_SOURCE_PROTO:=git
PKG_SOURCE_DATE:=2018-12-20
PKG_SOURCE_VERSION:=118e16da8e82f2e028654f86e47f4c8e5bddccc8
PKG_MIRROR_HASH:=f84616d5c6c3f6c0aded40b821d9b54fd88b78737f534b37a6ed0c51db16ed06
# Build the 4.19 ath10k-ct driver version. Other options are "-4.16", or
# leave un-defined for 4.7 kernel. Probably this should match as closely as
# possible to whatever mac80211 backports version is being used.
CT_KVER="-4.19"
PKG_MAINTAINER:=Ben Greear <greearb@candelatech.com>
PKG_BUILD_PARALLEL:=1
PKG_EXTMOD_SUBDIRS:=ath10k$(CT_KVER)
STAMP_CONFIGURED_DEPENDS := $(STAGING_DIR)/usr/include/mac80211-backport/backport/autoconf.h
include $(INCLUDE_DIR)/kernel.mk
include $(INCLUDE_DIR)/package.mk
define KernelPackage/ath10k-ct
SUBMENU:=Wireless Drivers
TITLE:=ath10k-ct driver optimized for CT ath10k firmware
DEPENDS:=+kmod-mac80211 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT @PCI_SUPPORT +kmod-hwmon-core
FILES:=\
$(PKG_BUILD_DIR)/ath10k$(CT_KVER)/ath10k_pci.ko \
$(PKG_BUILD_DIR)/ath10k$(CT_KVER)/ath10k_core.ko
AUTOLOAD:=$(call AutoProbe,ath10k_pci)
PROVIDES:=kmod-ath10k
endef
define KernelPackage/ath10k-ct/config
config ATH10K-CT_LEDS
bool "Enable LED support"
default y
depends on PACKAGE_kmod-ath10k-ct
endef
NOSTDINC_FLAGS = \
-I$(PKG_BUILD_DIR) \
-I$(STAGING_DIR)/usr/include/mac80211-backport/uapi \
-I$(STAGING_DIR)/usr/include/mac80211-backport \
-I$(STAGING_DIR)/usr/include/mac80211/uapi \
-I$(STAGING_DIR)/usr/include/mac80211 \
-include backport/autoconf.h \
-include backport/backport.h
ifdef CONFIG_PACKAGE_MAC80211_MESH
NOSTDINC_FLAGS += -DCONFIG_MAC80211_MESH
endif
CT_MAKEDEFS += CONFIG_ATH10K=m CONFIG_ATH10K_PCI=m CONFIG_ATH10K_CE=y
# This AHB logic is needed for IPQ4019 radios
CT_MAKEDEFS += CONFIG_ATH10K_AHB=m
NOSTDINC_FLAGS += -DCONFIG_ATH10K_AHB
NOSTDINC_FLAGS += -DSTANDALONE_CT
ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
CT_MAKEDEFS += CONFIG_ATH10K_DEBUGFS=y CONFIG_MAC80211_DEBUGFS=y
NOSTDINC_FLAGS += -DCONFIG_MAC80211_DEBUGFS
NOSTDINC_FLAGS += -DCONFIG_ATH10K_DEBUGFS
endif
ifdef CONFIG_PACKAGE_ATH_DEBUG
NOSTDINC_FLAGS += -DCONFIG_ATH10K_DEBUG
endif
ifdef CONFIG_PACKAGE_ATH_DFS
NOSTDINC_FLAGS += -DCONFIG_ATH10K_DFS_CERTIFIED
endif
ifdef CONFIG_PACKAGE_ATH_SPECTRAL
CT_MAKEDEFS += CONFIG_ATH10K_SPECTRAL=y
NOSTDINC_FLAGS += -DCONFIG_ATH10K_SPECTRAL
endif
ifeq ($(CONFIG_ATH10K-CT_LEDS),y)
CT_MAKEDEFS += CONFIG_ATH10K_LEDS=y
NOSTDINC_FLAGS += -DCONFIG_ATH10K_LEDS
endif
define Build/Configure
cp $(STAGING_DIR)/usr/include/mac80211/ath/*.h $(PKG_BUILD_DIR)
endef
ifneq ($(findstring c,$(OPENWRT_VERBOSE)),)
CT_MAKEDEFS += V=1
endif
define Build/Compile
+$(MAKE) $(CT_MAKEDEFS) $(PKG_JOBS) -C "$(LINUX_DIR)" \
$(KERNEL_MAKE_FLAGS) \
SUBDIRS="$(PKG_BUILD_DIR)/ath10k$(CT_KVER)" \
NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
modules
endef
$(eval $(call KernelPackage,ath10k-ct))