openwrt

mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-26 00:22:47 +00:00

OpenWrt Source Repository

Go to file

Christoph Krapp ba0f4f0cfd ramips: add support for TP-Link RE500 v1 This device uses the same hardware as RE650 v1 which got supported in `8c51dde`. Hardware specification: - SoC 880 MHz - MediaTek MT7621AT - 128 MB of DDR3 RAM - 16 MB - Winbond 25Q128FVSG - 4T4R 2.4 GHz - MediaTek MT7615E - 4T4R 5 GHz - MediaTek MT7615E - 1x 1 Gbps Ethernet - MT7621AT integrated - 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2)) - 4x buttons (Reset, Power, WPS, LED) - UART header (J1) - 2:GND, 3:RX, 4:TX Serial console @ 57600,8n1 Flash instructions: Upload openwrt-ramips-mt7621-tplink_re500-v1-squashfs-factory.bin from the RE500 web interface. TFTP recovery to stock firmware: Unfortunately, I can't find an easy way to recover the RE without opening the device and using modified binaries. The TFTP upload will only work if selected from u-boot, which means you have to open the device and attach to the serial console. The TFTP update procedure does not accept the published vendor firmware binaries. However, it allows to flash kernel + rootfs binaries, and this works if you have a backup of the original contents of the flash. It's probably possible to create special image out of the vendor binaries and use that as recovery image. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [remove dts-v1 in DTSI, do not touch WiFi LEDs for RE650, keep state_default in DTS files, fix label-mac-device, use lower case for WiFi LEDs] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2020-07-07 00:40:04 +02:00
.github	build: Update README & github help	2018-07-08 09:41:53 +01:00
config	kernel: rename CONFIG_NETPRIO_CGROUP to CONFIG_CGROUP_NET_PRIO	2020-06-27 00:19:13 +02:00
include	kernel: Update kernel 5.4 to version 5.4.50	2020-07-04 21:12:42 +02:00
package	ravpower-mcu: add missing PKG_RELEASE	2020-07-06 17:59:18 +02:00
scripts	build,json: fix build failure in case no data is found	2020-07-03 22:09:24 +01:00
target	ramips: add support for TP-Link RE500 v1	2020-07-07 00:40:04 +02:00
toolchain	toolchain: remove gcc libssp and use libc variant	2020-06-17 23:57:07 +02:00
tools	ramips: add support for TP-Link RE500 v1	2020-07-07 00:40:04 +02:00
.gitattributes
.gitignore	Revert ".gitignore: ignore more scripts/config output"	2020-04-11 19:53:28 +01:00
BSDmakefile
Config.in
feeds.conf.default	feeds: add freifunk feed	2020-06-24 14:58:17 +02:00
LICENSE
Makefile	build: refactor JSON info files to `profiles.json`	2020-04-03 12:17:45 +02:00
README	build: switch to Python 3	2019-07-26 08:09:16 +02:00
rules.mk	rules.mk: remove "$(STAGING_DIR)/include"	2019-11-02 20:51:56 +01:00

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org