openwrt/tools
Serg Studzinskii b7cc661615 ar71xx: add support for TP-Link TL-WR942N v1
TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on
Qualcomm/Atheros QCA9561.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x USB 2.0
- 11x LED (most are controlled by 74HC595)
- 2x button
- UART header on PCB*

* Serial console is disabled in OEM non-beta firmwares and corresponding
  GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by
  production (non-beta) U-Boot and firmware.

Currently not working:

1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs
   by some U-Boot versions.

Flash instruction under vendor GUI:

1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin".
2. Go to WEB interface and perform usual firmware upgrade.

FLash instruction under U-Boot recovery mode (doesn't work in beta
firmware):

1. Setup PC with static IP "192.168.0.66/24" and tftp server.
2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make
   it available to download from your tftp server.
3. Press "reset" button and power up the router, wait till "WPS" LED
   turns on.

Flash instruction under U-Boot, using UART (can be done only with
preinstalled UART-enabled U-Boot version!):

1. Use "tpl" to stop autobooting and obtain U-Boot CLI access.
2. Setup ip addresses for U-Boot and your tftp server.
3. Issue below commands:
   tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin
   erase 0x9f020000 +$filesize
   cp.b 0x81000000 0x9f020000 $filesize
   reset

Signed-off-by: Serg Studzinskii <serguzhg@gmail.com>
[minor code style fixes, extended commit message]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-11 21:32:17 +02:00
..
autoconf
automake automake: import upstream fix for perl 5.26 2017-06-07 19:47:34 +02:00
b43-tools b43-tools: fix tarball hash 2016-12-22 17:02:42 +01:00
bc
bison
ccache ccache: update to 3.3.4 2017-03-12 15:06:50 +01:00
cmake tools/cmake: update to 3.8.1 2017-05-25 19:01:07 +02:00
coreutils tools/coreutils: Update to 8.27 2017-03-20 08:24:34 +01:00
dosfstools tools/dosfstools: Update to 4.1 2017-03-20 08:24:05 +01:00
e2fsprogs tools/e2fsprogs: Update to 1.43.4 2017-02-09 12:26:13 +01:00
elftosb
expat
findutils
firmware-utils ar71xx: add support for TP-Link TL-WR942N v1 2017-06-11 21:32:17 +02:00
flex flex: update to 2.6.4 (FS#809) 2017-05-26 07:53:03 +02:00
flock
genext2fs
gengetopt
gmp tools: gmp: Update to 6.1.2 2017-01-03 14:24:33 +01:00
include tools: host/include/getline.h: Remove 2017-04-26 10:29:39 +02:00
isl tools/isl: update to 0.18 2017-05-25 19:01:07 +02:00
kernel2minor tools: update kernel2minor to 0.24 version 2017-01-25 07:54:06 +01:00
libelf
libressl tools/libressl: update to 2.5.4 2017-05-25 19:01:07 +02:00
libtool
lzma
lzma-old
m4 tools/m4: update 1.4.18 2017-02-26 13:31:45 +01:00
make-ext4fs treewide: clean up and unify PKG_VERSION for git based downloads 2016-12-22 16:42:21 +01:00
missing-macros
mkimage tools: mkimage: pass crypto libraries through HOST_LOADLIBES (FS#381) 2017-01-11 03:48:30 +01:00
mklibs
mm-macros
mpc
mpfr
mtd-utils tools: host/include/getline.h: Remove 2017-04-26 10:29:39 +02:00
mtools
padjffs2
patch
patch-image tools: patch-image: fix file descriptor leak. 2017-02-15 07:45:24 +01:00
patchelf
pkg-config
qemu qemu: rename internal crypto/aes symbols 2017-01-30 18:37:51 +01:00
quilt
scons
sdimage treewide: clean up and unify PKG_VERSION for git based downloads 2016-12-22 16:42:21 +01:00
sed tools/sed: Update to 4.4 2017-03-20 08:15:27 +01:00
sparse tools/sparse: Update to snapshot 2017-03-31 2017-05-29 10:00:43 +02:00
squashfs
squashfs4
sstrip
tar tar: override symlink permissions 2017-05-30 15:40:51 +02:00
upslug2
wrt350nv2-builder
xz xz: Update to 5.2.3 2017-01-03 14:24:32 +01:00
Makefile tools/upx: Remove from repo 2017-03-20 08:26:35 +01:00