openwrt/target/linux/mvebu/image
Klaus Kudielka afd4375a33 mvebu: Add turris-omnia.bootscript
In contrast to the U-Boot version shipped with older versions of Turris
Omnia (CZ11NIC13, CZ11NIC20), the version shipped with Turris Omnia 2019
(CZ11NIC23) relies on the existence of /boot.scr.

Consequently, add a suitable boot script to the sysupgrade image.

Flash instructions for Turris Omnia 2019:
- Download openwrt-...-sysupgrade.img.gz, gunzip it, and copy the resulting
  .img file to the root of a USB flash drive (FAT32 or ext2/3/4).
- Enter a rescue shell: Either via 5-LED reset and ssh root@192.168.1.1
  on LAN port 4, or via 7-LED reset and the serial console.
- Insert the USB drive and mount it:
  mkdir /mnt; mount /dev/sda1 /mnt
- Flash the OpenWrt image to eMMC:
  dd if=/mnt/openwrt-...-sysupgrade.img of=/dev/mmcblk0 bs=4096 conv=fsync
- Reboot.

Flash instructions using a temporary "medkit" installation were written for
the older versions of Turris Omnia, and will *not* work on the Turris Omnia
2019.

Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Tested-by: W. Michael Petullo <mike@flyn.org> (Turris Omnia "2020")
2020-11-26 21:52:04 -10:00
..
clearfog.bootscript
cortexa9.mk mvebu: Add turris-omnia.bootscript 2020-11-26 21:52:04 -10:00
cortexa53.mk mvebu: add initial support for Globalscale ESPRESSObin-Ultra 2020-11-23 22:53:15 +01:00
cortexa72.mk mvebu: add support for MACCHIATObin Single Shot 2020-07-12 02:06:02 +02:00
espressobin.bootscript mvebu: Add bootscript for espressobin to support mainline firmware 2020-10-11 16:53:20 +02:00
gen_mvebu_sdcard_img.sh
generic-arm64.bootscript mvebu: image: add check for fdt_add_r and kernel_addr_r variables 2020-09-17 21:09:51 +02:00
Makefile
turris-omnia.bootscript mvebu: Add turris-omnia.bootscript 2020-11-26 21:52:04 -10:00
udpu.bootscript