mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-24 15:43:25 +00:00
4871fd2616
Device specifications:
* QCA IPQ4019
* 256 MB of RAM
* 32 MB of SPI NOR flash (w25q256)
- 2x 15 MB available; but one of the 15 MB regions is the recovery image
* 2T2R 2.4 GHz
- QCA4019 hw1.0 (SoC)
- requires special BDF in QCA4019/hw1.0/board-2.bin with
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=PlasmaCloud-PA2200
* 2T2R 5 GHz (channel 36-64)
- QCA9888 hw2.0 (PCI)
- requires special BDF in QCA9888/hw2.0/board-2.bin
bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200
* 2T2R 5 GHz (channel 100-165)
- QCA4019 hw1.0 (SoC)
- requires special BDF in QCA4019/hw1.0/board-2.bin with
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=PlasmaCloud-PA2200
* GPIO-LEDs for 2.4GHz, 5GHz-SoC and 5GHz-PCIE
* GPIO-LEDs for power (orange) and status (blue)
* 1x GPIO-button (reset)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x gigabit ethernet
- phy@mdio3:
+ Label: Ethernet 1
+ gmac0 (ethaddr) in original firmware
+ used as LAN interface
- phy@mdio4:
+ Label: Ethernet 2
+ gmac1 (eth1addr) in original firmware
+ 802.3at POE+
+ used as WAN interface
* 12V 2A DC
Flashing instructions:
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.
Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai>
[sven@narfation.org: prepare commit message, rebase, use all LEDs, switch
to dualboot_datachk upgrade script, use eth1 as designated WAN interface]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
||
|---|---|---|
| .. | ||
| config | ||
| flashing | ||
| arm-magic.sh | ||
| brcmImage.pl | ||
| bundle-libraries.sh | ||
| cfe-bin-header.py | ||
| cfe-partition-tag.py | ||
| cfe-wfi-tag.py | ||
| checkpatch.pl | ||
| clang-gcc-wrapper | ||
| clean-package.sh | ||
| cleanfile | ||
| cleanpatch | ||
| combined-ext-image.sh | ||
| combined-image.sh | ||
| config.guess | ||
| config.rpath | ||
| config.sub | ||
| const_structs.checkpatch | ||
| deptest.sh | ||
| diffconfig.sh | ||
| dl_cleanup.py | ||
| dl_github_archive.py | ||
| download.pl | ||
| dump-target-info.pl | ||
| env | ||
| ext-toolchain.sh | ||
| feeds | ||
| fixup-makefile.pl | ||
| functions.sh | ||
| gen_image_generic.sh | ||
| gen-dependencies.sh | ||
| get_source_date_epoch.sh | ||
| getver.sh | ||
| ipkg-build | ||
| ipkg-make-index.sh | ||
| ipkg-remove | ||
| json_add_image_info.py | ||
| json_overview_image_info.py | ||
| kconfig.pl | ||
| linksys-image.sh | ||
| make-ipkg-dir.sh | ||
| md5sum | ||
| metadata.pm | ||
| mkhash.c | ||
| mkits-qsdk-ipq-image.sh | ||
| mkits.sh | ||
| om-fwupgradecfg-gen.sh | ||
| package-metadata.pl | ||
| pad_image | ||
| patch-kernel.sh | ||
| patch-specs.sh | ||
| portable_date.sh | ||
| qemustart | ||
| redboot-script.pl | ||
| relink-lib.sh | ||
| remote-gdb | ||
| rstrip.sh | ||
| sercomm-crypto.py | ||
| sercomm-partition-tag.py | ||
| sercomm-payload.py | ||
| sign_images.sh | ||
| size_compare.sh | ||
| slugimage.pl | ||
| spelling.txt | ||
| srecimage.pl | ||
| strip-kmod.sh | ||
| symlink-tree.sh | ||
| sysupgrade-tar.sh | ||
| target-metadata.pl | ||
| time.pl | ||
| timestamp.pl | ||
| ubinize-image.sh | ||