Kyoungkyu Park 9a1b9a42b7 ramips: add support for HUMAX E10 ... HUMAX E10 (also known as HUMAX QUANTUM E10) is a 2.4/5GHz band AC router, based on MediaTek MT7621A. Specifications: - SoC: MT7621A - RAM: DDR3 128MB - Flash: SPI NOR 16MB (MXIC MX25L12805D) - WiFi: - 2.4GHz: MT7615 - 5GHz: MT7615 - Ethernet: 2x 10/100/1000Mbps - Switch: SoC internal - USB: 1x USB 2.0 Type-A - UART: J1 (57600 8N1) - pinout: [3V3] (RXD) (GND) (TXD) Installation via web interface: - Flash **factory** image through the stock web interface. Recovery procedure: 1. Connect ethernet cable between Router **LAN** port and PC Ethernet port. 2. Set your computer to a static IP **192.168.1.1** 3. Turn the device off and wait a few seconds. Hold the WPS button on front of device and insert power. 4. Send a firmware image to **192.168.1.6** using TFTP. You can use any TFTP client. (tftp, curl, Tftpd64...) - It can accept both images which is HUMAX stock firmware dump (0x70000-0x1000000) image and OpenWRT **sysupgrade** image. Signed-off-by: Kyoungkyu Park <choryu.park@choryu.space> [remove trailing whitespace] Signed-off-by: Sungbo Eo <mans0n@gorani.run>		2021-12-12 20:33:19 +09:00
..
base-files/etc
dts	ramips: add support for HUMAX E10	2021-12-12 20:33:19 +09:00
files/drivers
image	ramips: add support for HUMAX E10	2021-12-12 20:33:19 +09:00
mt76x8	ramips: mt76x8: tidy up 02_network	2021-12-12 20:25:56 +09:00
mt7620	ramips: mt7620: Enable PHY aneg of Lava LR-25G001	2021-12-04 00:36:47 +01:00
mt7621	ramips: add support for HUMAX E10	2021-12-12 20:33:19 +09:00
patches-5.4	kernel: bump 5.4 to 5.4.162	2021-11-28 16:32:45 +01:00
patches-5.10
rt288x
rt305x
rt3883
Makefile
modules.mk