openwrt/target/linux
Dirk Buchwalder a36fc589fe ipq807x: add Edimax CAX1800
Edimax CAX1800 is a 802.11 ax dual-band AP
with PoE. AP can be ceiling or wall mount.

Specifications:

    •     CPU: Qualcomm IPQ8070A Quad core Cortex-A53 1.4GHz
    •     RAM: 512MB of DDR3
    •     Storage: 128MB NAND (contains rootfs) / 8MB NOR (contains art and uboot-env)
    •     Ethernet: 1x 1G RJ45 port (QCA8072) PoE
    •     WLAN:
          2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate
          5GHz: Qualcomm QCN5054 2x2 802.11a/b/g/n/ac/ax 1201 PHY rate

    •     LEDs:
          3 x GPIO-controlled System-LEDs
          (form one virtual RGB System-LED)
            black_small_square  Buttons: 1x soft reset
            black_small_square  Power: 12V DC jack or PoE (802.3af )

        An unpopulated serial header is onboard.
        RX/TX is working, bootwait is active, secure boot is not enabled.

        SSH can be activated in the stock firmware, but it drops only
        to a limited shell .

        Installation Instructions:

            black_small_square obtain serial access
            black_small_square stop auto boot

            black_small_square tftpboot the initramfs image (serverip is set to 192.168.99.8 in uboot)
            black_small_square bootm

            black_small_square copy openwrt-ipq807x-generic-edimax_cax1800-squashfs-nand-factory.ubi
	      to the device
            black_small_square write the image to the NAND:
            black_small_square cat /proc/mtd and look for rootfs partition (should be mtd0)
            black_small_square ubiformat /dev/mtd0 -f -y  openwrt-ipq807x-generic-edimax_cax1800-squashfs-
              nand-factory.ubi
            black_small_square reboot

	Note: Device is not using dual partitioning (NAND contains other partitions
        with different manufacture data etc.)
	Draytek VigorAP 960C and Lancom LW-600 both look similar, but I haven't checked them.

Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
2023-01-16 12:42:23 +01:00
..
airoha
apm821xx
archs38 archs38: mark as source-only 2023-01-16 11:05:34 +01:00
armvirt
at91 kernel: bump 5.10 to 5.10.163 2023-01-14 22:31:38 +01:00
ath25
ath79 kernel: bump 5.10 to 5.10.163 2023-01-14 22:31:38 +01:00
bcm27xx kernel: bump 5.15 to 5.15.87 2023-01-13 22:04:22 +01:00
bcm47xx
bcm53xx
bcm63xx kernel: bump 5.10 to 5.10.163 2023-01-14 22:31:38 +01:00
bcm4908
bmips
gemini
generic kernel: 5.15: add missing kernel configuration options 2023-01-16 12:42:23 +01:00
imx
ipq40xx ipq40xx: add support for Linksys WHW03 V2 2023-01-15 12:55:38 +01:00
ipq806x kernel: bump 5.10 to 5.10.163 2023-01-14 22:31:38 +01:00
ipq807x ipq807x: add Edimax CAX1800 2023-01-16 12:42:23 +01:00
kirkwood
lantiq kernel: bump 5.10 to 5.10.163 2023-01-14 22:31:38 +01:00
layerscape layerscape: Add CONFIG_NVMEM_LAYERSCAPE_SFP kernel configuration option 2023-01-08 18:51:27 +01:00
malta
mediatek mt76: add stand-alone MT7622 firmware package 2023-01-07 17:11:00 +01:00
mpc85xx kernel: backport of changes & helpers 2023-01-07 17:45:17 +01:00
mvebu kernel: bump 5.10 to 5.10.163 2023-01-14 22:31:38 +01:00
mxs
octeon
octeontx
omap
oxnas
pistachio kernel: bump 5.10 to 5.10.163 2023-01-14 22:31:38 +01:00
qoriq qoriq: drop unused kernel config 2023-01-09 21:39:45 +02:00
ramips ramips: mt7621: Add Arcadyan WE420223-99 support 2023-01-15 13:41:02 +01:00
realtek realtek: Follow kernel comment style recommendation 2023-01-13 22:34:16 +01:00
rockchip
sunxi sunxi: switch to kernel 5.15 2023-01-09 21:39:46 +02:00
tegra
uml
x86 kernel/x86: fix typo 2023-01-15 13:30:09 +01:00
zynq
Makefile