mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-09 08:20:39 +00:00
7a58972680
The current uboot default config for the A13 SOM erroneously enables support for the AXP209 power regulator IC which is not present on the board. This superfluous support module sets an incorrect initial clock frequency and confuses the kernel, ultimately leading to a boot failure later on. Properly disable the PMIC support and enable the EHCI support by translating the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and USB_EHCI_HCD symbols respectively. Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and refresh the remaining patches of the series while we're at it. Reported-by: Mario Fischer <mario-fischer@web.de> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
71 lines
3.0 KiB
Diff
71 lines
3.0 KiB
Diff
From b2b385df5095fff80b4655142f58a2a6801e6c80 Mon Sep 17 00:00:00 2001
|
|
From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
|
|
Date: Tue, 6 Jan 2015 21:26:44 +0100
|
|
Subject: sun6i: Fix and document PLL LDO voltage selection
|
|
|
|
The PRCM_PLL_CTRL_LDO_OUT_L and PRCM_PLL_CTRL_LDO_OUT_H macros had
|
|
their meaning reversed. This is fixed by this change-set. With this
|
|
changed, the PRCM_PLL_CTRL_LDO_OUT_L(1370) now becomes self-evident
|
|
as setting the voltage to 1.37v (which it had done all along, even
|
|
though stating a different target voltage).
|
|
|
|
After changing the PLL LDO setting, it will take a little while for
|
|
the voltage output to settle. A sdelay()-based loop waits the same
|
|
order of magnitude as Boot1.
|
|
|
|
Furthermore, a bit of documentation is added to clarify that the
|
|
required setting for the PLL LDO is 1.37v as per the A31 manual.
|
|
|
|
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
|
|
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
|
|
@@ -24,14 +24,27 @@ void clock_init_safe(void)
|
|
struct sunxi_prcm_reg * const prcm =
|
|
(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
|
|
|
|
- /* Set PLL ldo voltage without this PLL6 does not work properly */
|
|
+ /* Set PLL ldo voltage without this PLL6 does not work properly.
|
|
+ *
|
|
+ * As the A31 manual states, that "before enable PLL, PLLVDD
|
|
+ * LDO should be set to 1.37v", we need to configure this to 2.5v
|
|
+ * in the "PLL Input Power Select" (0 << 15) and (7 << 16).
|
|
+ */
|
|
clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
|
|
PRCM_PLL_CTRL_LDO_KEY);
|
|
clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
|
|
PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
|
|
- PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
|
|
+ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1370) );
|
|
clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
|
|
|
|
+ /* Give the PLL LDO voltage setting some time to take hold.
|
|
+ * Notes:
|
|
+ * 1) We need to use sdelay() as the timers aren't set up yet.
|
|
+ * 2) The 100k iterations come from Boot1, which spin's for 100k
|
|
+ * iterations through a loop.
|
|
+ */
|
|
+ sdelay(100000);
|
|
+
|
|
clock_set_pll1(408000000);
|
|
|
|
writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
|
|
--- a/arch/arm/include/asm/arch-sunxi/prcm.h
|
|
+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
|
|
@@ -111,13 +111,13 @@
|
|
#define PRCM_PLL_CTRL_LDO_OUT_MASK \
|
|
__PRCM_PLL_CTRL_LDO_OUT(0x7)
|
|
/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
|
|
-#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
|
|
- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
|
|
#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
|
|
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
|
|
+#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
|
|
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
|
|
-#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
|
|
- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
|
|
#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
|
|
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
|
|
+#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
|
|
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
|
|
#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
|
|
#define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
|