openwrt/package/boot
Alexey Bartenev dc79b51533 ramips: add support for Keenetic Lite III rev. A
General specification:
SoC Type: MediaTek MT7620N (580MHz)
ROM: 8 MB SPI-NOR (W25Q64FV)
RAM: 64 MB DDR (EM6AB160TSD-5G)
Switch: MediaTek MT7530
Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4)
Wireless: 2.4 GHz (MediaTek RT5390): b/g/n
Buttons: 3 button (POWER, RESET, WPS)
Slide switch: 4 position (BASE, ADAPTER, BOOSTER, ACCESS POINT)
Bootloader: U-Boot 1.1.3
Power: 9 VDC, 0.6 A

MAC in stock:
|-	+			|
| LAN 	| RF-EEPROM + 0x04	|
| WLAN	| RF-EEPROM + 0x04	|
| WAN 	| RF-EEPROM + 0x28	|

OEM easy installation
1. Use a PC to browse to http://my.keenetic.net.
2. Go to the System section and open the Files tab.
3. Under the Files tab, there will be a list of system
files. Click on the Firmware file.
4. When a modal window appears, click on the Choose File
button and upload the firmware image.
5. Wait for the router to flash and reboot.

OEM installation using the TFTP method
1. Download the latest firmware image and rename it to
klite3_recovery.bin.
2. Set up a Tftp server on a PC (e.g. Tftpd32) and place the
firmware image to the root directory of the server.
3. Power off the router and use a twisted pair cable to connect
the PC to any of the router's LAN ports.
4. Configure the network adapter of the PC to use IP address
192.168.1.2 and subnet mask 255.255.255.0.
5. Power up the router while holding the reset button pressed.
6. Wait approximately for 5 seconds and then release the
reset button.
7. The router should download the firmware via TFTP and
complete flashing in a few minutes.
After flashing is complete, use the PC to browse to
http://192.168.1.1 or ssh to proceed with the configuration.

Signed-off-by: Alexey Bartenev <41exey@proton.me>
2023-03-27 02:09:58 +02:00
..
arm-trusted-firmware-bcm63xx
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: update to sources of 2022-08-31 2022-08-31 21:10:39 +01:00
arm-trusted-firmware-mvebu arm-trusted-firmware-mvebu: Use host flags for cryptest compilation 2022-12-31 19:55:42 +01:00
arm-trusted-firmware-rockchip
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: Use common trusted-firmware-a.mk 2022-12-31 19:03:00 +01:00
arm-trusted-firmware-tools arm-trusted-firmware-tools: update to v2.7 2022-09-07 04:22:40 +01:00
at91bootstrap at91bootstrap: use sdmmc0 as booting media for sama5d27_som1_ek 2022-09-02 20:43:51 +02:00
fconfig
grub2 treewide: opt-out of tree-wide LTO usage 2023-03-21 18:28:23 +01:00
imx-bootlets
kexec-tools treewide: add support for "gc-sections" in PKG_BUILD_FLAGS 2023-03-21 18:28:22 +01:00
kobs-ng
mt7623n-preloader
tfa-layerscape tfa-layerscape: Use trusted-firmware-a.mk 2022-12-31 20:02:09 +01:00
uboot-at91 uboot-at91: use sdmmc0 as booting media for sama5d27_som1_ek 2022-09-02 20:43:51 +02:00
uboot-bcm4908 uboot-bcm4908: update to the latest generic 2022-12-08 12:10:21 +01:00
uboot-envtools ramips: add support for Keenetic Lite III rev. A 2023-03-27 02:09:58 +02:00
uboot-fritz4040 uboot-fritz4040: build FritzBox 7520 variant 2022-10-20 17:42:06 +02:00
uboot-imx
uboot-kirkwood uboot-kirkwood: build with kirkwood generic subtarget 2022-12-25 11:55:52 +01:00
uboot-lantiq
uboot-layerscape layerscape: Switch LS1012A-FRDM initramfs to gzip 2022-11-27 13:18:29 +01:00
uboot-mediatek uboot-mediatek: mark all packages as hidden 2023-03-04 16:27:25 +01:00
uboot-mvebu uboot-mvebu: update to version 2023.01 2023-01-17 23:17:33 +01:00
uboot-mxs uboot-mxs: build with mxs generic subtarget 2022-12-25 11:55:52 +01:00
uboot-omap uboot-omap: build with omap generic subtarget 2022-12-25 11:55:54 +01:00
uboot-oxnas
uboot-rockchip
uboot-sunxi arm-trusted-firmware-sunxi: Use common trusted-firmware-a.mk 2022-12-31 19:03:00 +01:00
uboot-tegra uboot-tegra: build with tegra generic subtarget 2022-12-25 11:55:53 +01:00
uboot-zynq uboot-zynq: build with zynq generic subtarget 2022-12-25 11:55:53 +01:00