RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-18 21:05:26 +00:00
Code Issues Packages Projects Releases Wiki Activity
OpenWrt Source Repository
32,374 Commits 9 Branches 74 Tags 238 MiB
C 61.2%
Makefile 19.2%
Shell 6.9%
Roff 6.7%
Perl 2.5%
Other 3.4%
8f24ee6382
Go to file
Steven Barth 8f24ee6382 uqmi: Add proper IPv6 support 
Use the new --ip-family option to start both IPv4 and IPv6 sessions
by default. Autoconnect can't be used when starting two sessions,
so revert back to using the client IDs and packet data handles for
handling the network connection.

Some modem firmwares do not implement a RA server, therefore by
default use outband IP configuration and static addressing. Some
other firmwares report bogus IP configuration with the WDS get
current settings command. In this case inband configuration with
DHCP/RA can be optionally enabled by setting option dhcp to 1.

Per 3GPP standard a /64 prefix is served to all clients, which is
extended to LAN as specified in RFC 7278.

v2: Restrict the IPv6 gateway route source address
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 46843
2015-09-11 06:46:40 +00:00
config linux: make IPv6 builtin if selected (saves >30KB) 2015-09-09 12:20:36 +00:00
docs build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
include nls.mk: add -rpath-link when needed for NLS support 2015-09-07 08:03:34 +00:00
package uqmi: Add proper IPv6 support 2015-09-11 06:46:40 +00:00
scripts build: add a build step for generic sysupgrade nand image 2015-09-04 14:44:27 +00:00
target imagebuilder: run build prereq checks before building image to set up host commands properly 2015-09-10 11:06:42 +00:00
toolchain musl: add a hack to remove unused crypt() algorithms, saves ~14k after lzma 2015-09-08 10:57:11 +00:00
tools tools/firmware-utils: add header version 2 support for mktplinkfw 2015-08-17 06:23:43 +00:00
.gitattributes
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile
Config.in
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
LICENSE
Makefile Makefile: move the cleaning of staging_dir/target* from dirclean to clean 2015-06-14 17:47:16 +00:00
README
rules.mk rules.mk: remove GCC 4.4 and GCC 4.5 conditional 2015-08-25 07:45:42 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org