mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-28 09:32:39 +00:00
f8b0010dfb
Hardware specs:
SoC: Qualcomm IPQ8065 (dual core Cortex-A15)
RAM: 512 MB DDR3
Flash: 256 MB NAND, 32 MB NOR
WiFi: QCA9983 2.4 GHz, QCA9984 5 GHz
Switch: QCA8337
Ethernet: 5x 10/100/1000 Mbit/s
USB: 1x USB 3.0 Type-A
Buttons: WPS, Reset
Power: 12 VDC, 2.5 A
Ethernet ports:
1x WAN: connected to eth2
4x LAN: connected via the switch to eth0 and eth1
(eth0 is disabled in OEM firmware)
MAC addresses (OEM and OpenWrt):
fw_env @ 0x00 d4🆎82:??:??:?a LAN (eth1)
fw_env @ 0x06 d4🆎82:??:??:?b WAN (eth2)
fw_env @ 0x0c d4🆎82:??:??:?c WLAN 2.4 GHz (ath1)
fw_env @ 0x12 d4🆎82:??:??:?d WLAN 5 GHz (ath0)
fw_env @ 0x18 d4🆎82:??:??:?e OEM usage unknown (eth0 in OpenWrt)
OID d4🆎82 is registered to:
ARRIS Group, Inc., 6450 Sequence Drive, San Diego CA 92121, US
More info:
https://openwrt.org/inbox/toh/arris/tr4400_v2
IMPORTANT:
This port requires moving the 'fw_env' partition prior to first boot to
consolidate 70% of the usable space in flash into a contiguous partition.
'fw_env' contains factory-programmed MAC addresses, SSIDs, and passwords.
Its contents must be copied to 'rootfs_1' prior to booting via initramfs.
Note that the stock 'fw_env' partition will be wiped during sysupgrade.
A writable 'stock_fw_env' partition pointing to the old, stock location
is included in the port to help rolling back this change if desired.
Installation:
- Requires serial access and a TFTP server.
- Fully boot stock, press ENTER, type in:
mtd erase /dev/mtd21
dd if=/dev/mtd22 bs=128K count=1 | mtd write - /dev/mtd21
umount /config && ubidetach -m 23 && mtd erase /dev/mtd23
- Reboot and interrupt U-Boot by pressing a key, type in:
set mtdids 'nand0=nand0'
set mtdparts 'mtdparts=nand0:155M@0x6500000(mtd_ubi)'
set bootcmd 'ubi part mtd_ubi && ubi read 0x44000000 kernel && bootm'
env save
- Setup TFTP server serving initramfs image as 'recovery.bin', type in:
set ipaddr 192.168.1.1
set serverip 192.168.1.2
tftpboot recovery.bin && bootm
- Use sysupgrade to install squashfs image.
This port is based on work done by AmadeusGhost <amadeus@jmu.edu.cn>.
Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
[add 5.15 changes for 0069-arm-boot-add-dts-files.patch]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
|
||
|---|---|---|
| .. | ||
| qcom-ipq8062-wg2600hp3.dts | ||
| qcom-ipq8062.dtsi | ||
| qcom-ipq8064-ad7200-c2600.dtsi | ||
| qcom-ipq8064-ad7200.dts | ||
| qcom-ipq8064-ap148.dts | ||
| qcom-ipq8064-ap161.dts | ||
| qcom-ipq8064-c2600.dts | ||
| qcom-ipq8064-d7800.dts | ||
| qcom-ipq8064-db149.dts | ||
| qcom-ipq8064-ea7500-v1.dts | ||
| qcom-ipq8064-ea8500.dts | ||
| qcom-ipq8064-eax500.dtsi | ||
| qcom-ipq8064-g10.dts | ||
| qcom-ipq8064-r7500.dts | ||
| qcom-ipq8064-r7500v2.dts | ||
| qcom-ipq8064-unifi-ac-hd.dts | ||
| qcom-ipq8064-v2.0.dtsi | ||
| qcom-ipq8064-vr2600v.dts | ||
| qcom-ipq8064-wg2600hp.dts | ||
| qcom-ipq8064-wpq864.dts | ||
| qcom-ipq8064-wxr-2533dhp.dts | ||
| qcom-ipq8065-nbg6817.dts | ||
| qcom-ipq8065-nighthawk.dtsi | ||
| qcom-ipq8065-r7800.dts | ||
| qcom-ipq8065-rt4230w-rev6.dts | ||
| qcom-ipq8065-tr4400-v2.dts | ||
| qcom-ipq8065-xr500.dts | ||
| qcom-ipq8065.dtsi | ||
| qcom-ipq8068-cryptid-common.dtsi | ||
| qcom-ipq8068-ecw5410.dts | ||
| qcom-ipq8068-mr42.dts | ||
| qcom-ipq8068-mr52.dts | ||