openwrt/target/linux/ath79
David Bauer 6f2e1b7485 ath79: disable delays on AT803X config init
Until upstream commit 6d4cd041f0af("net: phy: at803x: disable delay
only for RGMII mode"), delays were not disabled on driver probe
for the Atheros AR803x PHYs, although the RX delay is enabled on
soft and hard reset.

In addition, the TX delay setting is retained on soft-reset.

This patch disables both delays on config init to align the behavior
with kernel 5.1 and higher. It can be safely dropped with kernel 5.1.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-27 17:56:23 +01:00
..
base-files/etc/hotplug.d/ieee80211 ath79: split base-files into subtargets 2019-10-27 14:24:22 +01:00
dts ath79: add support for ZyXEL NBG6716 2019-10-27 13:38:49 +01:00
files ath79: add AR934x NAND Flash Controller driver 2019-10-20 15:32:53 +02:00
generic ath79: split base-files into subtargets 2019-10-27 14:24:22 +01:00
image ath79: fix remaining IMAGE_SIZE issues 2019-10-27 14:03:03 +01:00
nand ath79: split base-files into subtargets 2019-10-27 14:24:22 +01:00
patches-4.14 ath79: disable delays on AT803X config init 2019-10-27 17:56:23 +01:00
patches-4.19 ath79: disable delays on AT803X config init 2019-10-27 17:56:23 +01:00
tiny ath79: split base-files into subtargets 2019-10-27 14:24:22 +01:00
config-4.14 ath79: add support for D-Link DIR-859 A1 2018-12-30 20:08:13 +01:00
config-4.19 ath79: add support for Qihoo C301 2019-07-16 09:51:03 +08:00
Makefile treewide: kernel: bump some targets to 4.19 2019-06-18 16:08:55 +02:00
modules.mk