mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-24 15:43:25 +00:00
98d325aaf8
Apparently, a few ipq40xx devices have sporadic problems when reading the flash over SPI. When that happens, the result of the faulty SPI read is cached and it isn't re-attempted. Depending on when it happens, the router either panics and reboots or is left in a partially broken state (an application wont start). The data on the flash is alright. This wasn't the case with Openwrt with Linux < 5.x but I wasn't able to work out which software change was responsible. Github user karlpip created a patch for testing that disabled the cache entirely and added logs. Typically, only one or two SPI operations fail at a time: [689200.631152] spi-nor spi0.0: SPI transfer failed: -110 [689200.631280] spi_master spi0: failed to transfer one message from queue [689200.635369] jffs2: Write of 68 bytes at 0x00ffccf4 failed. returned -110, retlen 0 [689200.642014] jffs2: Not marking the space at 0x00ffccf4 as dirty because the flash driver returned retlen zero Because reads aren't re-attempted, squashfs can't recover: [3171844.279235] SQUASHFS error: Failed to read block 0x2bb912: -5 [3171844.279284] SQUASHFS error: Unable to read fragment cache entry [2bb912] [3171844.283980] SQUASHFS error: Unable to read page, block 2bb912, size 14e6c [3171844.291650] SQUASHFS error: Unable to read fragment cache entry [2bb912] [3171844.297831] SQUASHFS error: Unable to read page, block 2bb912, size 14e6c I assume there to be some kind of underlying electrical problem because, in my experience, this happens a lot more when PoE is used. NoTengoBattery has made an in-depth investigation: https://forum.openwrt.org/t/patch-squashfs-data-probably-corrupt/70480 .. and created a patch that evicts the page cache and retries reading: https://github.com/NoTengoBattery/openwrt/blob/linksys-ea6350v3-mastertrack/target/linux/ipq40xx/patches-5.4/9996-fs_squashfs_improve_squashfs_error_resistance.patch The patch also works well with the WPJ428 but NoTengoBattery didn't try to upstream it ("This is not the solution that should be used"). In 2020, I tried and failed to create a working patch that prevents faulty pages to be cached in the first place. Because I needed a solution, I backported "squashfs: add option to panic on errors " (10dde05b89980ef) which has since become available in Openwrt. The 'error=panic' option has been tested on a fleet of multiple hundred WPJ428s over multiple years. Without this patch, devices regularly went into 'limbo' on reboot or update and required a manual reboot. Devices with this patch don't. I was initially concerned that the kernel panic would leave devices with a real corrupted data but I haven't seen a case of actual corruption since (outside of people turning off the power during upgrades). The WPJ428 is the only device I tested this patch on - others might also benefit. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Leon M. Busch-George <leon@georgemail.eu> |
||
|---|---|---|
| .. | ||
| imagebuilder | ||
| linux | ||
| llvm-bpf | ||
| sdk | ||
| toolchain | ||
| Config.in | ||
| Makefile | ||