RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-23 15:12:50 +00:00
Code Issues Packages Projects Releases Wiki Activity
6a57e1fbfc
openwrt/target/linux/bcm63xx/patches-5.4/512-board_bcm6328.patch
Sieng Piaw Liew a58826c34f bcm63xx: add support for Innacomm W3400V6 
Innacomm W3400V6 is an xDSL B/G wireless router based on Broadcom BCM6328 SoC.

Hardware:
   SoC:          Broadcom BCM6328
   CPU:          BMIPS4350 V8.0, 320 MHz, 1 core
   Flash:        SPI-NOR 8MB, MX25L6406E
   RAM:          64 MB
   Ethernet:     4x 10/100 Mbps
   Switch:       Integrated
   Wireless:     802.11b/g, BCM4312
   LEDs/Buttons: 9x / 2x

Flash instruction, web UI:
1) Set a static IP on your computer compatible
with 192.168.1.1, i.e 192.168.1.100
2) Connect the ethernet cable from your computer to the router.
3) Make sure the router is powered off.
4) Press the reset button, don't release it yet!
5) While pressing reset, power on the router.
6) Wait 10 seconds or more.
Note: The power LED is red at first then turns to solid
green when ready.
8) Release the reset button.
9) Browse to 192.168.1.1
10) Select .bin file.
10) Upgrade the image.
11) Wait for it to reboot.

Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
[Ammend commit description, merge patches, DT improvements]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-12-09 08:42:26 +01:00

700 lines
13 KiB
Diff
Raw Blame History

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -348,6 +348,651 @@ static struct board_info __initdata boar
},
},
};
+
+static struct board_info __initdata board_963281TAN = {
+ .name = "963281TAN",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+};
+
+static struct board_info __initdata board_A4001N = {
+ .name = "96328dg2x2",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ },
+};
+
+static struct board_info __initdata board_A4001N1 = {
+ .name = "963281T_TEF",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ },
+};
+
+static struct sprom_fixup __initdata ad1018_fixups[] = {
+ { .offset = 6, .value = 0x1c00 },
+ { .offset = 65, .value = 0x1256 },
+ { .offset = 96, .value = 0x2046 },
+ { .offset = 97, .value = 0xfe69 },
+ { .offset = 98, .value = 0x1726 },
+ { .offset = 99, .value = 0xfa5c },
+ { .offset = 112, .value = 0x2046 },
+ { .offset = 113, .value = 0xfea8 },
+ { .offset = 114, .value = 0x1978 },
+ { .offset = 115, .value = 0xfa26 },
+ { .offset = 161, .value = 0x2222 },
+ { .offset = 169, .value = 0x2222 },
+ { .offset = 171, .value = 0x2222 },
+ { .offset = 173, .value = 0x2222 },
+ { .offset = 174, .value = 0x4444 },
+ { .offset = 175, .value = 0x2222 },
+ { .offset = 176, .value = 0x4444 },
+};
+
+static struct board_info __initdata board_AD1018 = {
+ .name = "96328avngr",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "FIBRE",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "LAN3",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "LAN2",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "LAN1",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM43217,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ .board_fixups = ad1018_fixups,
+ .num_board_fixups = ARRAY_SIZE(ad1018_fixups),
+ },
+};
+
+static struct sprom_fixup __initdata ar5381u_fixups[] = {
+ { .offset = 97, .value = 0xfee5 },
+ { .offset = 98, .value = 0x157c },
+ { .offset = 99, .value = 0xfae7 },
+ { .offset = 113, .value = 0xfefa },
+ { .offset = 114, .value = 0x15d6 },
+ { .offset = 115, .value = 0xfaf8 },
+};
+
+static struct board_info __initdata board_AR5381u = {
+ .name = "96328A-1241N",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ .board_fixups = ar5381u_fixups,
+ .num_board_fixups = ARRAY_SIZE(ar5381u_fixups),
+ },
+};
+
+static struct sprom_fixup __initdata ar5387un_fixups[] = {
+ { .offset = 2, .value = 0x05bb },
+ { .offset = 65, .value = 0x1204 },
+ { .offset = 78, .value = 0x0303 },
+ { .offset = 79, .value = 0x0202 },
+ { .offset = 80, .value = 0xff02 },
+ { .offset = 87, .value = 0x0315 },
+ { .offset = 88, .value = 0x0315 },
+ { .offset = 96, .value = 0x2048 },
+ { .offset = 97, .value = 0xff11 },
+ { .offset = 98, .value = 0x1567 },
+ { .offset = 99, .value = 0xfb24 },
+ { .offset = 100, .value = 0x3e3c },
+ { .offset = 101, .value = 0x4038 },
+ { .offset = 102, .value = 0xfe7f },
+ { .offset = 103, .value = 0x1279 },
+ { .offset = 112, .value = 0x2048 },
+ { .offset = 113, .value = 0xff03 },
+ { .offset = 114, .value = 0x154c },
+ { .offset = 115, .value = 0xfb27 },
+ { .offset = 116, .value = 0x3e3c },
+ { .offset = 117, .value = 0x4038 },
+ { .offset = 118, .value = 0xfe87 },
+ { .offset = 119, .value = 0x1233 },
+ { .offset = 203, .value = 0x2226 },
+};
+
+static struct board_info __initdata board_AR5387un = {
+ .name = "96328A-1441N1",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ .board_fixups = ar5387un_fixups,
+ .num_board_fixups = ARRAY_SIZE(ar5387un_fixups),
+ },
+};
+
+static struct board_info __initdata board_dsl_274xb_f1 = {
+ .name = "AW4339U",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+
+ .has_caldata = 1,
+ .caldata = {
+ {
+ .vendor = PCI_VENDOR_ID_ATHEROS,
+ .caldata_offset = 0x7d1000,
+ .slot = 0,
+ .led_pin = -1,
+ .led_active_high = 1,
+ },
+ },
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 4",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 3",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 2",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 1",
+ },
+ },
+ },
+};
+
+static struct board_info __initdata board_FAST2704V2 = {
+ .name = "F@ST2704V2",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .has_usbd = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+};
+
+static struct board_info __initdata board_PDG_A4001N_A_000_1A1_AX = {
+ .name = "96328avng",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ },
+};
+
+static struct board_info __initdata board_PDG_A4101N_A_000_1A1_AE = {
+ .name = "96328avngv",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ },
+};
+
+static struct board_info __initdata board_R5010UNV2 = {
+ .name = "96328ang",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM43217,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ },
+};
+
+static struct board_info __initdata board_TG582N = {
+ .name = "DANT-1",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ },
+};
+
+static struct board_info __initdata board_TG582N_TELECOM_ITALIA = {
+ .name = "DANT-V",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ },
+};
+
+static struct board_info __initdata board_W3400V6 = {
+ .name = "96328ang",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ },
+};
#endif /* CONFIG_BCM63XX_CPU_6328 */
/*
@@ -703,6 +1348,20 @@ static const struct board_info __initcon
#endif /* CONFIG_BCM63XX_CPU_6318 */
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
+ &board_963281TAN,
+ &board_A4001N,
+ &board_A4001N1,
+ &board_AD1018,
+ &board_AR5381u,
+ &board_AR5387un,
+ &board_dsl_274xb_f1,
+ &board_FAST2704V2,
+ &board_PDG_A4001N_A_000_1A1_AX,
+ &board_PDG_A4101N_A_000_1A1_AE,
+ &board_TG582N,
+ &board_TG582N_TELECOM_ITALIA,
+ &board_R5010UNV2,
+ &board_W3400V6,
#endif /* CONFIG_BCM63XX_CPU_6328 */
#ifdef CONFIG_BCM63XX_CPU_6338
&board_96338gw,
@@ -742,7 +1401,23 @@ static struct of_device_id const bcm963x
{ .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
#endif /* CONFIG_BCM63XX_CPU_6318 */
#ifdef CONFIG_BCM63XX_CPU_6328
+ { .compatible = "adb,a4001n", .data = &board_A4001N, },
+ { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+ { .compatible = "adb,pdg-a4001n-a-000-1a1-ax", .data = &board_PDG_A4001N_A_000_1A1_AX, },
+ { .compatible = "adb,pdg-a4101n-a-000-1a1-ae", .data = &board_PDG_A4101N_A_000_1A1_AE, },
{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
+ { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+ { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+ { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+ { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
+ { .compatible = "d-link,dsl-2750u-c1", .data = &board_A4001N, },
+ { .compatible = "innacomm,w3400v6", .data = &board_W3400V6, },
+ { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
+ { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
+ { .compatible = "sercomm,ad1018", .data = &board_AD1018, },
+ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
+ { .compatible = "technicolor,tg582n", .data = &board_TG582N, },
+ { .compatible = "technicolor,tg582n-telecom-italia", .data = &board_TG582N_TELECOM_ITALIA, },
#endif /* CONFIG_BCM63XX_CPU_6328 */
#ifdef CONFIG_BCM63XX_CPU_6338
{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
Reference in New Issue View Git Blame Copy Permalink