OpenWrt Source Repository
Go to file
David Bentham 67660d3667 ramips: fix WAN mac address allocation for Unielec 01 and 06 models
Manufacturer has predetermined mac address values for lan and wan ports.

This change keeps inline with other mt7621 devices mac address allocation
from factory mtd partition.

Example from hexdump output:

0xe000 0x6 (lan) -           0xe006 0x6 (wan)

0000e000  70 b3 d5 10 02 96 70 b3  d5 10 02 95 ff ff ff ff

Previous change had created an overlapping mac address situation as it
would increment by one based on the lan mac address location found in the
factory partition, which would sometimes increment to the same as the
mt7603 wifi chip.

Tested on Unielec u7621-01 model

Signed-off-by: David Bentham <db260179@gmail.com>
2022-10-23 01:45:52 +02:00
.github CI: kernel: fix deprecation of set-output 2022-10-21 16:09:19 +02:00
config scripts/download.pl: make the download tool configurable 2022-10-20 00:35:19 +02:00
include kernel: disable stack validation for external module builds as needed 2022-10-20 09:53:23 +02:00
LICENSES
package iproute2: update to 6.0.0 2022-10-22 22:50:36 +02:00
scripts scripts/download.pl: pass aria2 config in ENV only 2022-10-20 20:38:31 +02:00
target ramips: fix WAN mac address allocation for Unielec 01 and 06 models 2022-10-23 01:45:52 +02:00
toolchain build: prefer HTTPS if available (for packages) 2022-10-05 17:37:07 +02:00
tools tools/genext2fs: Add dependency to libtool 2022-10-23 01:45:52 +02:00
.gitattributes
.gitignore
BSDmakefile
Config.in
COPYING
feeds.conf.default
Makefile Makefile: fix stray \ warnings with grep-3.8 2022-09-27 16:45:08 +02:00
README.md README: add download section 2022-10-06 16:08:24 +02:00
rules.mk rules.mk: move DOWNLOAD_CHECK_CERTIFICATE to include/download.mk 2022-10-05 17:49:19 +02:00

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.6+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0