mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-25 16:13:05 +00:00
ca4469045f
Replace downstream RealTek PHY patches with backported ones. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
210 lines
6.6 KiB
Diff
210 lines
6.6 KiB
Diff
From deb8af5243504e379878ae3f9a091b21422d65b2 Mon Sep 17 00:00:00 2001
|
|
From: Alexander Couzens <lynxis@fe80.eu>
|
|
Date: Tue, 9 Apr 2024 09:30:11 +0200
|
|
Subject: [PATCH] net: phy: realtek: configure SerDes mode for rtl822xb PHYs
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
The rtl8221b and rtl8226b series support switching SerDes mode between
|
|
2500base-x and sgmii based on the negotiated copper speed.
|
|
|
|
Configure this switching mode according to SerDes modes supported by
|
|
host.
|
|
|
|
There is an additional datasheet for RTL8226B/RTL8221B called
|
|
"SERDES MODE SETTING FLOW APPLICATION NOTE" where a sequence is
|
|
described to setup interface and rate adapter mode.
|
|
|
|
However, there is no documentation about the meaning of registers
|
|
and bits, it's literally just magic numbers and pseudo-code.
|
|
|
|
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
|
|
[ refactored, dropped HiSGMII mode and changed commit message ]
|
|
Signed-off-by: Marek Behún <kabel@kernel.org>
|
|
[ changed rtl822x_update_interface() to use vendor register ]
|
|
[ always fill in possible interfaces ]
|
|
[ only apply to rtl8221b and rtl8226b phy's ]
|
|
[ set phydev->rate_matching in .config_init() ]
|
|
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
|
|
|
|
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Reviewed-by: should come before them, without any blank lines. As the
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/phy/realtek.c | 114 ++++++++++++++++++++++++++++++++++++--
|
|
1 file changed, 110 insertions(+), 4 deletions(-)
|
|
|
|
--- a/drivers/net/phy/realtek.c
|
|
+++ b/drivers/net/phy/realtek.c
|
|
@@ -54,6 +54,16 @@
|
|
RTL8201F_ISR_LINK)
|
|
#define RTL8201F_IER 0x13
|
|
|
|
+#define RTL822X_VND1_SERDES_OPTION 0x697a
|
|
+#define RTL822X_VND1_SERDES_OPTION_MODE_MASK GENMASK(5, 0)
|
|
+#define RTL822X_VND1_SERDES_OPTION_MODE_2500BASEX_SGMII 0
|
|
+#define RTL822X_VND1_SERDES_OPTION_MODE_2500BASEX 2
|
|
+
|
|
+#define RTL822X_VND1_SERDES_CTRL3 0x7580
|
|
+#define RTL822X_VND1_SERDES_CTRL3_MODE_MASK GENMASK(5, 0)
|
|
+#define RTL822X_VND1_SERDES_CTRL3_MODE_SGMII 0x02
|
|
+#define RTL822X_VND1_SERDES_CTRL3_MODE_2500BASEX 0x16
|
|
+
|
|
#define RTL8366RB_POWER_SAVE 0x15
|
|
#define RTL8366RB_POWER_SAVE_ON BIT(12)
|
|
|
|
@@ -659,6 +669,63 @@ static int rtl822x_write_mmd(struct phy_
|
|
return ret;
|
|
}
|
|
|
|
+static int rtl822xb_config_init(struct phy_device *phydev)
|
|
+{
|
|
+ bool has_2500, has_sgmii;
|
|
+ u16 mode;
|
|
+ int ret;
|
|
+
|
|
+ has_2500 = test_bit(PHY_INTERFACE_MODE_2500BASEX,
|
|
+ phydev->host_interfaces) ||
|
|
+ phydev->interface == PHY_INTERFACE_MODE_2500BASEX;
|
|
+
|
|
+ has_sgmii = test_bit(PHY_INTERFACE_MODE_SGMII,
|
|
+ phydev->host_interfaces) ||
|
|
+ phydev->interface == PHY_INTERFACE_MODE_SGMII;
|
|
+
|
|
+ /* fill in possible interfaces */
|
|
+ __assign_bit(PHY_INTERFACE_MODE_2500BASEX, phydev->possible_interfaces,
|
|
+ has_2500);
|
|
+ __assign_bit(PHY_INTERFACE_MODE_SGMII, phydev->possible_interfaces,
|
|
+ has_sgmii);
|
|
+
|
|
+ if (!has_2500 && !has_sgmii)
|
|
+ return 0;
|
|
+
|
|
+ /* determine SerDes option mode */
|
|
+ if (has_2500 && !has_sgmii) {
|
|
+ mode = RTL822X_VND1_SERDES_OPTION_MODE_2500BASEX;
|
|
+ phydev->rate_matching = RATE_MATCH_PAUSE;
|
|
+ } else {
|
|
+ mode = RTL822X_VND1_SERDES_OPTION_MODE_2500BASEX_SGMII;
|
|
+ phydev->rate_matching = RATE_MATCH_NONE;
|
|
+ }
|
|
+
|
|
+ /* the following sequence with magic numbers sets up the SerDes
|
|
+ * option mode
|
|
+ */
|
|
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x75f3, 0);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND1,
|
|
+ RTL822X_VND1_SERDES_OPTION,
|
|
+ RTL822X_VND1_SERDES_OPTION_MODE_MASK,
|
|
+ mode);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x6a04, 0x0503);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x6f10, 0xd455);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ return phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x6f11, 0x8020);
|
|
+}
|
|
+
|
|
static int rtl822x_get_features(struct phy_device *phydev)
|
|
{
|
|
int val;
|
|
@@ -695,6 +762,28 @@ static int rtl822x_config_aneg(struct ph
|
|
return __genphy_config_aneg(phydev, ret);
|
|
}
|
|
|
|
+static void rtl822xb_update_interface(struct phy_device *phydev)
|
|
+{
|
|
+ int val;
|
|
+
|
|
+ if (!phydev->link)
|
|
+ return;
|
|
+
|
|
+ /* Change interface according to serdes mode */
|
|
+ val = phy_read_mmd(phydev, MDIO_MMD_VEND1, RTL822X_VND1_SERDES_CTRL3);
|
|
+ if (val < 0)
|
|
+ return;
|
|
+
|
|
+ switch (val & RTL822X_VND1_SERDES_CTRL3_MODE_MASK) {
|
|
+ case RTL822X_VND1_SERDES_CTRL3_MODE_2500BASEX:
|
|
+ phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
|
|
+ break;
|
|
+ case RTL822X_VND1_SERDES_CTRL3_MODE_SGMII:
|
|
+ phydev->interface = PHY_INTERFACE_MODE_SGMII;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
static int rtl822x_read_status(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
@@ -716,6 +805,19 @@ static int rtl822x_read_status(struct ph
|
|
return rtlgen_get_speed(phydev);
|
|
}
|
|
|
|
+static int rtl822xb_read_status(struct phy_device *phydev)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ ret = rtl822x_read_status(phydev);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ rtl822xb_update_interface(phydev);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
|
|
{
|
|
int val;
|
|
@@ -988,7 +1090,8 @@ static struct phy_driver realtek_drvs[]
|
|
.name = "RTL8226B_RTL8221B 2.5Gbps PHY",
|
|
.get_features = rtl822x_get_features,
|
|
.config_aneg = rtl822x_config_aneg,
|
|
- .read_status = rtl822x_read_status,
|
|
+ .config_init = rtl822xb_config_init,
|
|
+ .read_status = rtl822xb_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = rtlgen_resume,
|
|
.read_page = rtl821x_read_page,
|
|
@@ -1010,7 +1113,8 @@ static struct phy_driver realtek_drvs[]
|
|
.name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
|
|
.get_features = rtl822x_get_features,
|
|
.config_aneg = rtl822x_config_aneg,
|
|
- .read_status = rtl822x_read_status,
|
|
+ .config_init = rtl822xb_config_init,
|
|
+ .read_status = rtl822xb_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = rtlgen_resume,
|
|
.read_page = rtl821x_read_page,
|
|
@@ -1020,7 +1124,8 @@ static struct phy_driver realtek_drvs[]
|
|
.name = "RTL8221B-VB-CG 2.5Gbps PHY",
|
|
.get_features = rtl822x_get_features,
|
|
.config_aneg = rtl822x_config_aneg,
|
|
- .read_status = rtl822x_read_status,
|
|
+ .config_init = rtl822xb_config_init,
|
|
+ .read_status = rtl822xb_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = rtlgen_resume,
|
|
.read_page = rtl821x_read_page,
|
|
@@ -1030,7 +1135,8 @@ static struct phy_driver realtek_drvs[]
|
|
.name = "RTL8221B-VM-CG 2.5Gbps PHY",
|
|
.get_features = rtl822x_get_features,
|
|
.config_aneg = rtl822x_config_aneg,
|
|
- .read_status = rtl822x_read_status,
|
|
+ .config_init = rtl822xb_config_init,
|
|
+ .read_status = rtl822xb_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = rtlgen_resume,
|
|
.read_page = rtl821x_read_page,
|