OpenWrt Source Repository
Go to file
Matthias Schiffer 61c57af618
build: set TARGET_ROOTFS_PARTSIZE to make combined image fit in 128MB
Change TARGET_ROOTFS_PARTSIZE from 128 to 104 MiB, so the whole image
(bootloader + boot + root) will fit on a 128MB CF card by default.

With these settings, the generated images (tested on x86-generic and
x86-64) have 126,353,408 bytes; the smallest CF card marketed as "128MB"
that I found a datasheet for (a Transcend TS128MCF80) has 126,959,616
bytes.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2019-09-21 13:48:15 +02:00
.github
config build: set TARGET_ROOTFS_PARTSIZE to make combined image fit in 128MB 2019-09-21 13:48:15 +02:00
include rootfs.mk: ensure all timestamp are set to SOURCE_DATE_EPOCH 2019-09-21 03:26:38 +02:00
package usign: update to latest Git HEAD 2019-09-21 01:12:35 +02:00
scripts build: make device tree arg really optional in mkits.sh 2019-09-19 23:43:27 +02:00
target sunxi: Add support for Banana Pi M2 Ultra 2019-09-21 01:12:35 +02:00
toolchain gcc: Fix ICE in GCC 9.2.0 2019-09-20 19:27:25 +02:00
tools scons: move to packages feed 2019-09-15 22:53:01 +02:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile build: add buildinfo files for reproducibility 2019-08-13 10:40:36 +02:00
README build: switch to Python 3 2019-07-26 08:09:16 +02:00
rules.mk librpc: remove package 2019-01-22 13:29:46 +01:00

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org