openwrt/target/linux/realtek/dts-5.10
Markus Stockhausen 6153c530cc realtek: add support for D-Link DGS-1210-20
Hardware specification
 ----------------------

 * RTL8382M SoC, 1 MIPS 4KEc core @ 500MHz
 * 128MB DRAM
 * 32MB NOR Flash
 * 16 x 10/100/1000BASE-T ports
    - Internal PHY with 8 ports (RTL8218B)
    - External PHY with 8 ports (RTL8218B)
 * 4 x Gigabit RJ45/SFP Combo ports
    - External PHY with 4 SFP ports (RTL8214FC)
 * Power LED
 * Reset button on front panel
 * UART (115200 8N1) via unpopulated standard 0.1" pin header marked J6

 UART pinout
 -----------

  [o]ooo|J6
   | ||`------ GND
   | |`------- RX
   | `-------- TX
   `---------- Vcc (3V3)

 Boot initramfs image from U-Boot
 --------------------------------

  1. Press Escape key during `Hit Esc key to stop autoboot` prompt
  2. Press CTRL+C keys to get into real U-Boot prompt
  3. Init network with `rtk network on` command
  4. Load image with `tftpboot 0x8f000000 openwrt-realtek-rtl838x-d-link_dgs-1210-20-initramfs-kernel.bin` command
  5. Boot the image with `bootm` command

To install, upload the sysupgrade image to the OEM webpage or sysupgrade
from the system running from initramfs image.

It has been developed and tested on device with F1 revision.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
[correct initramfs image name]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-06-19 08:36:21 +02:00
..
rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi realtek: add support for Panasonic Switch-M8eG PN28080K 2022-03-13 19:54:57 +01:00
rtl838x.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl839x.dtsi realtek: fix node addresses for RTL839x 2022-02-20 16:23:55 +00:00
rtl930x.dtsi realtek: use DT provided address for timers 2022-02-20 16:23:58 +00:00
rtl931x.dtsi realtek: consolidate bootargs again 2022-02-20 16:23:55 +00:00
rtl8380_netgear_gigabit_1xx.dtsi
rtl8380_netgear_gigabit_3xx.dtsi
rtl8380_netgear_gigabit.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8380_netgear_gs108t-v3.dts
rtl8380_netgear_gs110tpp-v1.dts realtek: netgear-gs110tpp: Add system LEDs 2021-12-27 13:51:41 +01:00
rtl8380_netgear_gs308t-v1.dts realtek: add support for power LED on Netgear GS308Tv1 2022-06-18 09:21:50 +02:00
rtl8380_netgear_gs310tp-v1.dts
rtl8380_panasonic_m8eg-pn28080k.dts realtek: add support for Panasonic Switch-M8eG PN28080K 2022-03-13 19:54:57 +01:00
rtl8380_zyxel_gs1900-8.dts
rtl8380_zyxel_gs1900-8hp-v1.dts
rtl8380_zyxel_gs1900-8hp-v2.dts
rtl8380_zyxel_gs1900-10hp.dts
rtl8380_zyxel_gs1900.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8382_allnet_all-sg8208m.dts realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_d-link_dgs-1210-10p.dts realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8382_d-link_dgs-1210-16.dts
rtl8382_d-link_dgs-1210-20.dts realtek: add support for D-Link DGS-1210-20 2022-06-19 08:36:21 +02:00
rtl8382_d-link_dgs-1210-28.dts realtek: add gpio-restart for D-Link DGS-1210-28 2022-06-07 17:11:28 +02:00
rtl8382_d-link_dgs-1210.dtsi realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_inaba_aml2-17gp.dts realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_iodata_bsh-g24mb.dts realtek: add support for I-O DATA BSH-G24MB 2022-03-07 21:44:53 +01:00
rtl8382_zyxel_gs1900-16.dts realtek: add support for ZyXEL GS1900-16 2022-05-07 17:23:45 +02:00
rtl8382_zyxel_gs1900-24-v1.dts realtek: add ZyXEL GS1900-24 v1 support 2022-03-13 19:24:13 +01:00
rtl8382_zyxel_gs1900-24e.dts realtek: add support for ZyXEL GS1900-24E 2022-06-06 10:30:50 +02:00
rtl8382_zyxel_gs1900-24hp-v1.dts realtek: add ZyXEL GS1900-24HP v1 support 2022-04-16 17:26:56 +02:00
rtl8382_zyxel_gs1900-24hp-v2.dts
rtl8393_zyxel_gs1900-48.dts realtek: ZyXEL GS1900-48: fix system LED polarity 2022-02-20 16:23:55 +00:00
rtl9302_zyxel_xgs1250-12.dts realtek: consolidate bootargs again 2022-02-20 16:23:55 +00:00