openwrt/tools
Sander Vanheule c9f51a9ad6 ath79: support for TP-Link EAP225-Wall v2
TP-Link EAP225-Wall v2 is an AC1200 (802.11ac Wave-2) wall plate access
point. UART access and debricking require fine soldering.

The device was kindly provided for porting by Stijn Segers.

Device specifications:
* SoC: QCA9561 @ 775MHz
* RAM: 128MiB DDR2
* Flash: 16MiB SPI-NOR (GD25Q127CSIG)
* Wireless 2.4GHz (SoC): b/g/n, 2x2
* Wireless 5Ghz (QCA9886): a/n/ac, 2x2 MU-MIMO
* Ethernet (SoC): 4× 100Mbps
  * Eth0 (back): 802.3af/at PoE in
  * Eth1, Eth2 (bottom)
  * Eth3 (bottom): PoE out (can be toggled by GPIO)
* One status LED
* Two buttons (both work as failsafe)
  * LED button, implemented as KEY_BRIGHTNESS_TOGGLE
  * Reset button

Flashing instructions, requires recent firmware (tested on 1.20.0):
* ssh into target device and run `cliclientd stopcs`
* Upgrade with factory image via web interface

Debricking:
* Serial port can be soldered on PCB J4 (1: TXD, 2: RXD, 3: GND, 4: VCC)
    * Bridge unpopulated resistors R162 (TXD) and R165 (RXD)
      Do NOT bridge R164
    * Use 3.3V, 115200 baud, 8n1
* Interrupt bootloader by holding CTRL+B during boot
* tftp initramfs to flash via sysupgrade or LuCI web interface

MAC addresses:
MAC address (as on device label) is stored in device info partition at
an offset of 8 bytes. ath9k device has same address as ethernet, ath10k
uses address incremented by 1.
From OEM ifconfig:
    br0       Link encap:Ethernet  HWaddr 50:...:04
    eth0      Link encap:Ethernet  HWaddr 50:...:04
    wifi0     Link encap:UNSPEC  HWaddr 50-...-04-...
    wifi1     Link encap:UNSPEC  HWaddr 50-...-05-...

Signed-off-by: Sander Vanheule <sander@svanheule.net>
[fix IMAGE_SIZE]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-12 19:37:24 +02:00
..
autoconf
autoconf-archive tools: add autoconf-archive 2020-05-20 15:37:16 +02:00
automake
b43-tools
bc
bison tools/bison: update to 3.7.1 2020-08-23 11:29:24 +02:00
cbootimage
cbootimage-configs
ccache tools/ccache: update to 3.7.11 2020-08-23 19:40:51 +02:00
cmake tools/cmake: update to 3.18.2 2020-08-23 19:40:42 +02:00
coreutils tools/coreutils: update to 8.32 2020-08-30 22:21:34 +02:00
dosfstools
e2fsprogs tools/e2fsprogs: fix build under macos 2020-04-10 11:52:00 +01:00
elftosb
expat
fakeroot tools: fakeroot: use TCP as IPC transport 2020-09-09 13:33:50 +02:00
findutils tools/findutils: Update to 4.7.0 2020-04-09 22:08:38 +02:00
firmware-utils ath79: support for TP-Link EAP225-Wall v2 2020-09-12 19:37:24 +02:00
flex
flock tools/flock: add PKG_{VERSION,RELEASE} 2020-07-23 11:30:22 +02:00
genext2fs
gengetopt
gmp
include
isl
kernel2minor
libelf
libressl
libtool
lzma treewide: https for downloads.openwrt.org sources 2020-08-31 11:26:10 +01:00
lzma-old treewide: https for downloads.openwrt.org sources 2020-08-31 11:26:10 +01:00
m4
make-ext4fs
missing-macros tools: drop PKG_VERSION for purely local packages 2020-07-23 10:54:33 +02:00
mkimage tools/mkimage: create .itb file with read-access for group,other not just owner. 2020-07-23 14:25:10 -04:00
mklibs
mm-macros tools/mm-macros: Update to 1.0.0 2020-04-09 22:09:21 +02:00
mpc tools/mpc: update to 1.2.0 2020-08-27 21:18:16 +02:00
mpfr tools/mpfr: update to 4.1.0 2020-08-23 19:40:32 +02:00
mtd-utils tools: mtd-utils: Update to version 2.1.2 2020-08-26 23:29:35 +02:00
mtools tools/mtools: Update to 4.0.24 2020-04-09 22:09:04 +02:00
padjffs2 tools: drop PKG_VERSION for purely local packages 2020-07-23 10:54:33 +02:00
patch
patch-image rb532: drop target 2020-09-02 16:29:22 +02:00
patchelf
pkgconf
qemu
quilt
sdimage
sed
sparse
squashfs squashfs: Fix compile with GCC 10 2020-05-24 14:38:40 +02:00
squashfskit4 tools/squashfskit4: fix build on non-linux systems 2020-09-01 17:01:56 +02:00
sstrip tools/sstrip: add PKG_{VERSION,RELEASE} 2020-07-23 11:30:14 +02:00
tar
xz tools/xz: Update to 5.2.5 2020-04-09 22:09:13 +02:00
zip
zlib
zstd tools: add zstd 2020-05-31 11:03:30 +02:00
Makefile tools: sort alphabetically 2020-09-02 16:29:22 +02:00