openwrt/target/linux/siflower/dts/sf19a2890_evb.dts

141 lines
2.3 KiB
Plaintext

/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "sf19a2890.dtsi"
/ {
model = "Siflower SF19A2890 Evaluation Board";
compatible = "siflower,sf19a2890-evb", "siflower,sf19a2890";
aliases {
led-boot = &led_wlan;
led-failsafe = &led_wlan;
led-running = &led_wlan;
led-upgrade = &led_wlan;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
leds {
compatible = "gpio-leds";
led_wlan: wlan {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
rtl8367rb {
compatible = "realtek,rtl8367b";
realtek,extif = <6 0 0 1 1 1 1 1 1 2>;
mii-bus = <&mdio>;
phy-id = <0>;
};
};
&gmac {
status = "okay";
phy-mode = "rgmii-id";
snps,ps-speed = <1000>;
nvmem-cells = <&macaddr_factory_0>, <&rgmii_delay_factory_b2>;
nvmem-cell-names = "mac-address", "rgmii-delay";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
&wlan_rf {
status = "okay";
};
&uart0 {
status = "okay";
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "spl-loader";
reg = <0x0 0x20000>; /* 128k */
read-only;
};
partition@20000 {
label = "u-boot";
reg = <0x20000 0x60000>; /* 384k */
};
partition@80000 {
label = "u-boot-env";
reg = <0x80000 0x10000>; /* 64k */
};
factory:partition@90000 {
label = "factory";
reg = <0x90000 0x10000>; /* 64k */
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_0: macaddr@0 {
reg = <0x0 0x6>;
};
rgmii_delay_factory_b2: rgmii-delay@b2 {
reg = <0xb2 0x4>;
};
};
};
partition@a0000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0xa0000 0x0>; /* 640k- */
};
};
};
};