openwrt

mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2025-02-18 21:16:54 +00:00

OpenWrt Source Repository

Go to file

Paul Fertser 522d5ff428 ramips: add support for Xiaomi Mi Wi-Fi Router 3G v2 - CMIIT ID: 2019AP2581 - SoC: MediaTek MT7621 - Flash: 16MiB NOR SPI (GigaDevice GD25Q128B) - RAM: 128MiB DDR3 (ESMT M15T1G1664A) - Serial: As marked on PCB, 3V3 logic, baudrate is 115200, 8n1 - Ethernet: 3x 10/100/1000 Mbps (switched, 2xLAN + WAN) - WIFI0: MT7603E 2.4GHz 802.11b/g/n - WIFI1: MT7612E 5GHz 802.11ac - Antennas: 4x external (2 per radio), non-detachable - LEDs: Programmable "power" LED (two-coloured, yellow/blue) Non-programmable "internet" LED (shows WAN activity) - Buttons: Reset INSTALLATION: Bootloader won't accept any serial input unless "boot_wait" u-boot environment variable is changed to "on". Vendor firmware (looks like an illegal OpenWrt fork) won't accept any serial input unless "uart_en" is set to "1". Tricks to force u-boot to use default environment do not help as it's restricted in the same way. With bootloader unlocked the easiest way would be to TFTP the sysupgrade image or to sysupgrade after loading an initramfs one. For porting the flash contents were changed externally with an SPI programmer (after lifting Vcc flash IC pin away from the PCB). Forum thread [0] indicates that this device is identical to "Xiaomi Mi Router 4A Gigabit Edition". [0] https://forum.openwrt.org/t/xiaomi-mi-router-4a-gigabit-edition-r4ag-r4a-gigabit-fully-supported-but-requires-overwriting-spi-flash-with-programmer/36685 Signed-off-by: Paul Fertser <fercerpav@gmail.com>		2019-10-27 12:25:56 +01:00
.github	build: Update README & github help	2018-07-08 09:41:53 +01:00
config	Revert "build: separate signing logic"	2019-10-21 16:26:24 +02:00
include	Revert "build: separate signing logic"	2019-10-21 16:26:24 +02:00
package	ath79: uboot-envtools: Add GL-AR300M-Lite	2019-10-24 23:06:41 +02:00
scripts	build: add script to sign packages	2019-10-21 14:07:08 +02:00
target	ramips: add support for Xiaomi Mi Wi-Fi Router 3G v2	2019-10-27 12:25:56 +01:00
toolchain	toolchain: gcc: enable sanitizers for glibc toolchain	2019-10-24 11:40:00 +00:00
tools	tools: keep stamp file in $(STAGING_DIR_HOST)	2019-10-24 11:34:34 +00:00
.gitattributes
.gitignore	.gitignore: add .project & .cproject for eclipse users	2018-01-17 11:07:17 +01:00
BSDmakefile
Config.in
feeds.conf.default	feeds: switch git.lede-project.org URLs to git.openwrt.org	2018-01-16 16:59:22 +01:00
LICENSE
Makefile	build: add buildinfo as single Makefile target	2019-10-17 14:01:33 +02:00
README	build: switch to Python 3	2019-07-26 08:09:16 +02:00
rules.mk	toolchain,build: prefer -ffile-prefix-map for gcc-8+	2019-10-09 09:13:44 +02:00

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org