openwrt/target/linux/mediatek
Tianling Shen cc6c3a6ee8 mediatek: add support for OpenEmbed SOM7981
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: 256 MiB SPI-NAND, 32 GB eMMC optional
  RAM: 0.5/1 GB DDR4
  Ethernet: 1x 1GbE, 1x 2.5GbE (RTL8221B)
  WiFi: MediaTek MT7976C
  USB: 1x USB 3.0
  GPIO: 26-Pin header
  UART: 6 GND, 8 TX, 10 RX (in Pin header)
  Button: Reset, WPS
  Power: Type-C PD

Installation:
The board comes with a third-party custom OpenWrt image, you can upload
sysupgrade image via LuCI directly WITHOUT keeping configurations.

Or power on the board with pressing reset button for 5 second, then visit
http://192.168.1.1 and upload -factory.bin firmware.

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2024-03-31 20:20:59 +02:00
..
base-files
dts mediatek: add support for OpenEmbed SOM7981 2024-03-31 20:20:59 +02:00
files
files-6.1 mediatek: mt7988: add missing clock for PCIe ports 2024-03-15 14:09:11 +00:00
files-6.6 mediatek: mt7988: add missing clock for PCIe ports 2024-03-15 14:09:11 +00:00
filogic mediatek: add support for OpenEmbed SOM7981 2024-03-31 20:20:59 +02:00
image mediatek: add support for OpenEmbed SOM7981 2024-03-31 20:20:59 +02:00
mt7622 treewide: disable spectre mitigation on unaffected Arm64 targets 2024-03-23 20:00:49 +01:00
mt7623 treewide: disable spectre mitigation on unaffected Arm32 targets 2024-03-23 20:00:49 +01:00
mt7629 treewide: disable spectre mitigation on unaffected Arm32 targets 2024-03-23 20:00:49 +01:00
patches-6.1 mediatek: mt7981: pinctrl: add additional emmc groups 2024-03-13 20:47:23 +00:00
patches-6.6 kernel: bump 6.6 to 6.6.23 2024-03-31 18:19:33 +02:00
Makefile mediatek: add Linux 6.6 as testing kernel 2024-03-11 21:22:12 +00:00
modules.mk