Mikhail Zhilkin 4a043dc9d4 ramips: add factory image for TP-Link EC330-G5u v1 ... This commit adds factory.bin image for TP-Link EC330-G5u v1. This allows to install OpenWrt without connecting a serial cable (UART). Installation using factory image -------------------------------- Tested with "3.16.0 0.9.1 v6037.0 Build 191016 Rel.30619nb" TP-Link firmware. 1. Login to the router web interface (http://192.168.0.1/ by default) and save running config to "conf.bin" file 2. Open configuration file in any TP-Link config editor (e.g. https://jahed.github.io/tp-link-config-editor/) 3. Find "DeviceInfo" section and insert a new string "<Description val="Modem Router`telnetd -p 1023 -l login`" />" according to the following example: <DeviceInfo> ... <Description val="Modem Router`telnetd -p 1023 -l login`" /> ... </DeviceInfo> 4. Save configuration file and upload changed configuration using stock firmware interface 5. Login using telnet to IP:192.168.0.1 (Username:admin, password:1234) 6. Run "cat /proc/mtd | grep mtd7" a. If the result is 'mtd7: 03000000 00020000 "rootfs" 03400000', then install stock firmware using web interface to toggle booted firmware image from "os1" to "os0" b. If the result is 'mtd7: 03000000 00020000 "rootfs" 00400000', then all is ok, go to the next step 7. Set up a tftp server with OpenWrt factory.bin image (IP:192.168.0.100 in this example) 8. Login using telnet to 192.168.0.1 9. Download OpenWrt factory.bin image from the tftp server: cd /tmp tftp -g -r factory.bin 192.168.0.100 10. Write OpenWrt factory.bin image: dd if=/tmp/factory.bin of=/dev/mtdblock1 11. Power cycle the router Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>		2023-04-29 22:34:51 +02:00
..
imagebuilder
linux	ramips: add factory image for TP-Link EC330-G5u v1	2023-04-29 22:34:51 +02:00
llvm-bpf
sdk
toolchain
Config.in
Makefile