openwrt/target/linux/ramips/image
Maxim Anisimov dbebfb88b5 ramips: add support for Keenetic KN-1613
Keenetic KN-1613 is a 2.4/5 Ghz band 11ac (Wi-Fi 5) router, based on MT7628AN.

Specification:
- System-On-Chip: MT7628AN
- CPU/Speed: 580 MHz
- Flash-Chip: Winbond w25q256
- Flash size: 32768 KiB
- RAM: 128 MiB
- 4x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- Wireless No1 (2T2R): SoC Built-in 2.4 GHz 802.11bgn
- Wireless No2 (2T2R): MT7613BE 5 GHz 802.11ac
- 4x LED, 2x button, 1x mode switch

Notes:
- The device supports dual boot mode
- The firmware partitions were concatinated into one
- The FN button led indicator has been reassigned as the 2.4GHz
  wifi indicator.

Flash instruction:
The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot:

1. Configure PC with static IP 192.168.1.2/24 and tftp server.
2. Rename "openwrt-ramips-mt76x8-keenetic_kn-1613-squashfs-factory.bin"
   to "KN-1613_recovery.bin" and place it in tftp server directory.
3. Connect PC with one of LAN ports, press the reset button, power up
   the router and keep button pressed until power led start blinking.
4. Router will download file from server, write it to flash and reboot.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
2023-01-06 17:53:10 +01:00
..
lzma-loader
common-sercomm.mk ramips: add support for Etisalat S3 2022-12-13 23:06:20 +01:00
common-tp-link.mk
Makefile ramips: define lzma-loader recipe for SEAMA devices 2022-11-12 18:15:55 +01:00
mt76x8.mk ramips: add support for Keenetic KN-1613 2023-01-06 17:53:10 +01:00
mt7620.mk ramips: add support for SNR-CPE-W4N-MT router 2022-12-17 22:34:44 +01:00
mt7621.mk ramips: add Unielec U7621-06 32M build target 2023-01-05 00:10:14 +01:00
rt288x.mk treewide: uniform vendor name for ASUS 2022-11-16 23:30:11 +01:00
rt305x.mk treewide: uniform vendor name for ASUS 2022-11-16 23:30:11 +01:00
rt3883.mk treewide: uniform vendor name for ASUS 2022-11-16 23:30:11 +01:00