openwrt/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts
Nikolay Martynov 665c2154ef ramips: add basic support for tp-link er605-v2
This is a MT7621-based device with 128MB NAND flash, 256MB RAM, and a USB port.
The board has headers to attach console. In order for them to work two solder
bridges near those pads need to be made.

The defice has the following partition table:

```
0x000000000000-0x000000080000 : "u-boot"
0x000000080000-0x000000100000 : "u-boot-env"
0x000000100000-0x000000140000 : "factory"
0x000000140000-0x000007e00000 : "firmware"
0x000007e00000-0x000008000000 : "panic-ops"
```

`firmware` partition contains UBI volumes. Unfortunately I accidentally wiped
partition and I no longer have access to it.

`firmware` partition contains 'secondary' U-Boot which is run by 'first' u-boot.
It also contains various configuration partitions that include device info and
MAC address. There also seems to be 'primary' and 'backup' set of 'main' volumes.

U-boot has `mtkupgrade` command that just overrides data on firmware partitions.
Firmware file provided by TP-Link cannot be used with that command.

U-boot also has 'recovery' http server. Unfortunately I was not able to make it
work with manufacturer's firmware.

Manufacturer's firmware essentially contains multiple UBI volumes along with
'partition table'. Unfortunately I no longer can properly run manufacturer's
firmware so I cannot at the moment try to a support for building 'factory' images.

This patch adds support for initramfs image as well as sysupgrade image.

This seems to be pretty standard MT7621 board otherwise.

Things that work:
* network
* leds
* usb
* factory MAC detection

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
2023-01-04 23:19:19 +01:00

181 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "TP-Link ER605 v2";
compatible = "tplink,er605-v2", "mediatek,mt7621-soc";
chosen {
bootargs = "console=ttyS0,115200 noinitrd";
};
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
label-mac-device = &gmac0;
};
leds {
compatible = "gpio-leds";
led_usb: usb {
label = "green:usb";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
led_power: power {
label = "green:power";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_system: system {
label = "green:system";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset button";
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
reg_usb_vbus: regulator-usb {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
&gmac0 {
label = "dsa";
};
&gmac1 {
status = "okay";
label = "eth0";
phy-handle = <&ethphy0>;
};
&switch0 {
ports {
port@0 {
status = "disabled";
};
port@1 {
status = "okay";
label = "eth1";
};
port@2 {
status = "okay";
label = "eth2";
};
port@3 {
status = "okay";
label = "eth3";
};
port@4 {
status = "okay";
label = "eth4";
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "u-boot-env";
reg = <0x80000 0x80000>;
read-only;
};
factory: partition@100000 {
label = "factory";
reg = <0x100000 0x40000>;
read-only;
};
partition@140000 {
label = "firmware";
reg = <0x140000 0x7cc0000>;
};
partition@7e00000 {
label = "panic-ops";
reg = <0x7e00000 0x200000>;
};
};
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&state_default {
gpio {
groups = "uart2", "uart3", "pcie", "jtag";
function = "gpio";
};
};
&spi0 {
status = "disabled";
};
&xhci {
vusb33-supply = <&reg_3p3v>;
vbus-supply = <&reg_usb_vbus>;
};