openwrt/package/boot
Davy Hollevoet 394f54ee62 ath79/nand: add support for Netgear WNDR4300TN
This patch adds support for the WNDR4300TN, marketed by Belgian ISP
Telenet. The hardware is the same as the WNDR4300 v1, without the
fifth ethernet port (WAN) and the USB port. The circuit board has
the traces, but the components are missing.

Specifications:
* SoC: Atheros AR9344
* RAM: 128 MB
* Flash: 128 MB NAND flash
* WiFi: Atheros AR9580 (5 GHz) and AR9344 (2.4 GHz)
* Ethernet: 4x 1000Base-T
* LED: Power, LAN, WiFi 2.4GHz, WiFi 5GHz, WPS
* UART: on board, to the right of the RF shield at the top of the board

Installation:

* Flashing through the OEM web interface:
  + Connect your computer to the router with an ethernet cable and browse
    to http://192.168.0.51/
  + Log in with the default credentials are admin:password
  + Browse to Advanced > Administration > Firmware Upgrade in the Telenet
    interface
  + Upload the Openwrt firmware: openwrt-ath79-nand-netgear_wndr4300tn-squashfs-factory.img
  + Proceed with the firmware installation and give the device a few
    minutes to finish and reboot.

* Flashing through TFTP:
  + Configure your wired client with a static IP in the 192.168.1.x range,
    e.g. 192.168.1.10 and netmask 255.255.255.0.
  + Power off the router.
  + Press and hold the RESET button (the factory reset button on the bottom
    of the device, with the gray circle around it, next to the Telenet logo)
    and turn the router on while keeping the button pressed.
  + The power LED will start flashing orange. You can release the button
    once it switches to flashing green.
  + Transfer the image over TFTP:
    $ tftp 192.168.1.1 -m binary -c put openwrt-ath79-nand-netgear_wndr4300tn-squashfs-factory.img

Signed-off-by: Davy Hollevoet <github@natox.be>
[use DT label reference for adding LEDs in DTSI files]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-06 16:56:07 +02:00
..
arm-trusted-firmware-mvebu
arm-trusted-firmware-rockchip atf-rockchip: update to 2.3 2020-07-28 15:52:44 +02:00
arm-trusted-firmware-sunxi
at91bootstrap
fconfig
grub2
imx-bootlets
kexec-tools
kobs-ng
mt7623n-preloader mediatek: new mt7623n preloader package for Banana Pi 2020-07-08 23:22:30 +02:00
tfa-layerscape layerscape: harmonize device strings 2020-07-27 12:06:52 +02:00
uboot-ar71xx
uboot-at91
uboot-envtools ath79/nand: add support for Netgear WNDR4300TN 2020-08-06 16:56:07 +02:00
uboot-fritz4040
uboot-imx6
uboot-kirkwood uboot-kirkwood: add uboot for CheckPoint L-50 2020-07-11 13:33:28 +02:00
uboot-lantiq
uboot-layerscape layerscape: harmonize device strings 2020-07-27 12:06:52 +02:00
uboot-mediatek mediatek: add U-Boot build for UniElec U7623 2020-07-26 16:42:36 +08:00
uboot-mvebu uboot-mvebu: add uboot for helios 4 2020-07-17 11:00:33 +02:00
uboot-mxs uboot-mxs: bump to v2020.04 2020-06-03 16:49:28 +02:00
uboot-omap
uboot-oxnas
uboot-ramips ramips: add support for RAVPower RP-WD009 2020-06-29 12:24:01 +02:00
uboot-rockchip uboot-rockchip: add NanoPi R2S support 2020-07-28 15:52:44 +02:00
uboot-sunxi uboot-sunxi: bump to 2020.04 relase 2020-04-17 13:43:34 +02:00
uboot-tegra
uboot-zynq