135 lines
3.2 KiB
Diff
135 lines
3.2 KiB
Diff
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
|
|
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
|
|
@@ -31,6 +31,7 @@
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
+ append-rootblock = "nullparameter="; /* override the bootloader args */
|
|
};
|
|
|
|
memory@0 {
|
|
@@ -94,6 +95,8 @@
|
|
status = "okay";
|
|
phy = <&phy1>;
|
|
phy-mode = "sgmii";
|
|
+ nvmem-cells = <&macaddr_vendor_0>;
|
|
+ nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
sata@a0000 {
|
|
@@ -175,6 +178,24 @@
|
|
gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
+
|
|
+ virtual_flash {
|
|
+ compatible = "mtd-concat";
|
|
+
|
|
+ devices = <&mtd_kernel &mtd_gap &mtd_gap2>;
|
|
+
|
|
+ partitions {
|
|
+ compatible = "fixed-partitions";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ partition@0 {
|
|
+ compatible = "openwrt,uimage", "denx,uimage";
|
|
+ label = "firmware";
|
|
+ reg = <0x0 0x0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
};
|
|
|
|
&mdio {
|
|
@@ -265,48 +286,52 @@
|
|
reg = <0>; /* Chip select 0 */
|
|
spi-max-frequency = <20000000>;
|
|
|
|
- /*
|
|
- * Warning!
|
|
- *
|
|
- * Synology u-boot uses its compiled-in environment
|
|
- * and it seems Synology did not care to change u-boot
|
|
- * default configuration in order to allow saving a
|
|
- * modified environment at a sensible location. So,
|
|
- * if you do a 'saveenv' under u-boot, your modified
|
|
- * environment will be saved at 1MB after the start
|
|
- * of the flash, i.e. in the middle of the uImage.
|
|
- * For that reason, it is strongly advised not to
|
|
- * change the default environment, unless you know
|
|
- * what you are doing.
|
|
- */
|
|
- partition@0 { /* u-boot */
|
|
- label = "RedBoot";
|
|
- reg = <0x00000000 0x000c0000>; /* 768KB */
|
|
- };
|
|
+ partitions {
|
|
+ compatible = "fixed-partitions";
|
|
|
|
- partition@c0000 { /* uImage */
|
|
- label = "zImage";
|
|
- reg = <0x000c0000 0x002d0000>; /* 2880KB */
|
|
- };
|
|
+ partition@0 { /* u-boot */
|
|
+ label = "u-boot";
|
|
+ reg = <0x00000000 0x000c0000>; /* 768KB */
|
|
+ read-only;
|
|
+ };
|
|
|
|
- partition@390000 { /* uInitramfs */
|
|
- label = "rd.gz";
|
|
- reg = <0x00390000 0x00440000>; /* 4250KB */
|
|
- };
|
|
+ mtd_gap: partition@c0000 { /* gap */
|
|
+ label = "gap";
|
|
+ reg = <0x000c0000 0x00040000>; /* 256KB */
|
|
+ };
|
|
|
|
- partition@7d0000 { /* MAC address and serial number */
|
|
- label = "vendor";
|
|
- reg = <0x007d0000 0x00010000>; /* 64KB */
|
|
- };
|
|
+ partition@100000 { /* u-boot-env */
|
|
+ label = "u-boot-env";
|
|
+ reg = <0x00100000 0x00010000>; /* 64KB */
|
|
+ };
|
|
|
|
- partition@7e0000 {
|
|
- label = "RedBoot config";
|
|
- reg = <0x007e0000 0x00010000>; /* 64KB */
|
|
- };
|
|
+ mtd_kernel: partition@110000 {
|
|
+ label = "kernel";
|
|
+ reg = <0x00110000 0x006c0000>; /* 6912KB */
|
|
+ };
|
|
|
|
- partition@7f0000 {
|
|
- label = "FIS directory";
|
|
- reg = <0x007f0000 0x00010000>; /* 64KB */
|
|
+ partition@7d0000 { /* MAC address and serial number */
|
|
+ reg = <0x007d0000 0x00010000>; /* 64KB */
|
|
+ label = "vendor";
|
|
+ read-only;
|
|
+
|
|
+ compatible = "nvmem-cells";
|
|
+
|
|
+ nvmem-layout {
|
|
+ compatible = "fixed-layout";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ macaddr_vendor_0: macaddr@0 {
|
|
+ reg = <0x0 0x6>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ mtd_gap2: partition@7e0000 {
|
|
+ label = "gap2";
|
|
+ reg = <0x007e0000 0x00020000>; /* 128KB */
|
|
+ };
|
|
};
|
|
};
|
|
};
|