openwrt/target/linux/ath79/dts/qca9563_tplink_archer-c6-v2-us.dts
Rosen Penev e816591e22 ath79: qca: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 17:14:04 -08:00

152 lines
2.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9563_tplink_archer-x6-v2.dtsi"
/ {
compatible = "tplink,archer-c6-v2-us", "qca,qca9563";
model = "TP-Link Archer C6 v2 (US) / A6 v2 (US/TW)";
aliases {
label-mac-device = &eth0;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "green:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "green:wlan2g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "green:wlan5g";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan {
label = "green:lan";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
label = "green:wan";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wan_fail {
label = "amber:wan";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
wps {
label = "green:wps";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "factory-boot";
reg = <0x000000 0x020000>;
read-only;
};
info: partition@20000 {
label = "info";
reg = <0x020000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
reg = <0x8 0x6>;
};
};
};
partition@30000 {
label = "u-boot";
reg = <0x030000 0x020000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0xf80000>;
};
partition@fd0000 {
label = "tplink";
reg = <0xfd0000 0x020000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};
&wmac {
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};