openwrt/target/linux/ath79/dts/qca9531_glinet_gl-xe300.dts

174 lines
2.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "glinet,gl-xe300", "qca,qca9531";
model = "GL.iNet GL-XE300";
aliases {
label-mac-device = &eth0;
};
gpio-export {
compatible = "gpio-export";
gpio_lte_power {
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
gpio-export,name = "lte_power";
gpio-export,output = <1>;
};
gpio_sd_detect {
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
gpio-export,name = "sd_detect";
gpio-export,output = <0>;
};
};
keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
lan {
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
label = "green:lan";
};
wan {
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
label = "green:wan";
};
wlan {
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
label = "green:wlan";
linux,default-trigger = "phy0tpt";
};
lte {
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
label = "green:lte";
};
};
};
&pcie0 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
};
art: partition@50000 {
label = "art";
reg = <0x50000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
compatible = "mac-base";
reg = <0x0 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@60000 {
label = "kernel";
reg = <0x60000 0x400000>;
};
partition@460000 {
label = "nor_reserved";
reg = <0x460000 0xba0000>;
};
};
};
flash@1 {
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x0 0x8000000>;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
nvmem-cells = <&macaddr_art_0 0>;
nvmem-cell-names = "mac-address";
};
&eth1 {
nvmem-cells = <&macaddr_art_0 1>;
nvmem-cell-names = "mac-address";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};