openwrt

OpenWrt Source Repository

Go to file

Florian Fainelli 3b92b4de00 I recently came across an ar7 device which has the vlynq hardwired so that the clocks are always generated by the remote device instead of the local one. Upon initialization the current version of vlynq driver disables remote clock generation and causes the entire bus to hang on my device. This patch adds support for detecting which device (local or remote) is responsible of clock generation and implements clock initialization based on detection result. Signed-off-by: Antti Seppala <a.seppala at gmail.com> SVN-Revision: 16049		2009-05-25 13:13:10 +00:00
docs	a couple of small fixes in the Wireless documentation	2009-05-22 13:45:22 +00:00
include	enable lzma for squashfs4 by default	2009-05-21 18:11:22 +00:00
package	enable multicast routing by default	2009-05-24 21:26:40 +00:00
scripts	scripts/feeds: ignore virtual packages	2009-05-08 10:39:32 +00:00
target	I recently came across an ar7 device which has the vlynq hardwired so that the clocks are always generated by the remote device instead of the local one.	2009-05-25 13:13:10 +00:00
toolchain	make uclibc 0.9.30.1 the default	2009-05-25 11:17:01 +00:00
tools	revert r16017 there are no users of it yet	2009-05-24 14:02:46 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile	…
Config.in	Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target	2009-03-18 15:57:18 +00:00
LICENSE	…
Makefile	avoid implicit rules in even more places	2009-03-03 14:16:48 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	feeds.conf.default: Change openwrt feeds urls from https to svn	2009-04-01 18:29:19 +00:00
rules.mk	get rid of $Id$ - it has never helped us and it has broken too many patches ;)	2009-04-17 14:09:46 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org