OpenWrt Source Repository
Go to file
John Crispin 30fbc1a4d1 ramips: Add support for ZBT WG3526
The WG3526 is the follow-up to the 2626 and is mostly the same, with the
excaption that the mt7602 has been replaced with the mt7603. The internal wifi
setup has also changed slightly. Based on my tests, everything that worked on
the 2626 works on the 3526 and with roughly the same performance.

v1->v2:
* Remove some references to 2626 that I had missed in the dts.

v2->v3:
* Update patch to match new file structure.
* Removed SD driver to be consistent with other MT7621 targets.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>

SVN-Revision: 49213
2016-04-21 19:47:08 +00:00
config build: don't add -fno-plt for ARC 2016-02-07 13:29:16 +00:00
docs build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
include kernel: update kernel 4.4 to version 4.4.7 2016-04-16 21:05:48 +00:00
package curl: remove file accidentally committed in r49197 2016-04-19 20:18:50 +00:00
scripts scripts/getver.sh: Use 'git-rev-parse' to detect if tree lies in Git repository 2016-04-13 20:52:26 +00:00
target ramips: Add support for ZBT WG3526 2016-04-21 19:47:08 +00:00
toolchain toolchain/uClibc: enable UCLIBC_HAS_OBSOLETE_BSD_SIGNAL 2016-04-17 12:49:30 +00:00
tools tools/cmake: update to 3.5.1 2016-04-17 12:52:37 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default feeds.conf.default: remove the commented ancient feeds 2016-04-20 17:19:08 +00:00
LICENSE
Makefile Makefile: set timezone to UTC 2016-01-28 22:42:18 +00:00
README
rules.mk build: disable the use of -iremap for UML (#21851) 2016-02-13 22:23:32 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org