openwrt/target/linux/generic/pending-4.4/022-bcma-from-4.8.patch

53 lines
1.8 KiB
Diff

--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -76,9 +76,16 @@ config BCMA_PFLASH
default y
config BCMA_SFLASH
- bool
- depends on BCMA_DRIVER_MIPS
+ bool "ChipCommon-attached serial flash support"
+ depends on BCMA_HOST_SOC
default y
+ help
+ Some cheap devices have serial flash connected to the ChipCommon
+ instead of independent SPI controller. It requires using a separated
+ driver that implements ChipCommon specific interface communication.
+
+ Enabling this symbol will let bcma recognize serial flash and register
+ it as platform device.
config BCMA_NFLASH
bool
--- a/drivers/bcma/driver_chipcommon_b.c
+++ b/drivers/bcma/driver_chipcommon_b.c
@@ -33,11 +33,12 @@ static bool bcma_wait_reg(struct bcma_bu
void bcma_chipco_b_mii_write(struct bcma_drv_cc_b *ccb, u32 offset, u32 value)
{
struct bcma_bus *bus = ccb->core->bus;
+ void __iomem *mii = ccb->mii;
- writel(offset, ccb->mii + 0x00);
- bcma_wait_reg(bus, ccb->mii + 0x00, 0x0100, 0x0000, 100);
- writel(value, ccb->mii + 0x04);
- bcma_wait_reg(bus, ccb->mii + 0x00, 0x0100, 0x0000, 100);
+ writel(offset, mii + BCMA_CCB_MII_MNG_CTL);
+ bcma_wait_reg(bus, mii + BCMA_CCB_MII_MNG_CTL, 0x0100, 0x0000, 100);
+ writel(value, mii + BCMA_CCB_MII_MNG_CMD_DATA);
+ bcma_wait_reg(bus, mii + BCMA_CCB_MII_MNG_CTL, 0x0100, 0x0000, 100);
}
EXPORT_SYMBOL_GPL(bcma_chipco_b_mii_write);
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -504,6 +504,9 @@
#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000
#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20
+#define BCMA_CCB_MII_MNG_CTL 0x0000
+#define BCMA_CCB_MII_MNG_CMD_DATA 0x0004
+
/* BCM4331 ChipControl numbers. */
#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */
#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */