openwrt/include
INAGAKI Hiroshi 879f2ef7c0 ath79: modify mtd partitions for Buffalo BHR-4GRV2
This commit modifies mtd partitions define for Buffalo BHR-4GRV2 and
move it to generic subtarget.

In Buffalo BHR-4GRV2, "kernel" partition is located behined "rootfs"
partition in the stock firmware. This causes the size of the kernel
to be limited by the fixed value.

0x50000                       0xe80000        0xff0000
  +-------------------------------+--------------+
  |            rootfs             |    kernel    |
  |           (14528k)            |    (1472k)   |
  +-------------------------------+--------------+

After ar71xx was updated to Kernel 4.14, the kernel size of BHR-4GRV2
exceeded the limit, and it breaks builds on official buildbot.
Since this issue was also confirmed in ath79, I modified the mtd
partitions to get rid of that limitation.

0x50000                                       0xff0000
  +----------------------------------------------+
  |                   firmware                   |
  |                   (16000k)                   |
  +----------------------------------------------+

However, this commit breaks compatibility with ar71xx firmware, so I
dropped "SUPPORTED_DEVICES += bhr-4grv2".

This commit requires new flash instruction instead of the old one.

Flash instruction using initramfs image:

1. Connect the computer to the LAN port of BHR-4GRV2
2. Set the IP address of the computer to 192.168.12.10
3. Rename the OpenWrt initramfs image to
"bhr4grv2-uImage-initramfs-gzip.bin" and place it into the TFTP
directory
4. Start the tftp server on the computer
5. While holding down the "ECO" button, connect power cable to
BHR-4GRV2 and turn on it
6. Flashing (orange) diag LED and release the finger from the button,
BHR-4GRV2 downloads the intiramfs image from TFTP server and boot
with it
7. On the initramfs image, create "/etc/fw_env.config" file with
following contents
  /dev/mtd1 0x0 0x10000 0x10000
8. Execute following commands to add environment variables for
u-boot
  fw_setenv ipaddr 192.168.12.1
  fw_setenv serverip 192.168.12.10
  fw_setenv ethaddr 00:aa:bb:cc:dd:ee
  fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
9. Perform sysupgrade with squashfs-sysupgrade image
10. Wait ~150 seconds to complete flashing

And this commit includes small fix; BHR-4GRV2 has QCA9557 as a SoC,
not QCA9558.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-11-26 12:28:17 +01:00
..
site include/site: add powerpc64 config 2017-10-24 13:24:04 +02:00
autotools.mk treewide: fix build depends to refer to source package names 2018-01-13 19:54:44 +01:00
cmake.mk build: use CMAKE_SOURCE_SUBDIR variable to cmake.mk 2018-09-29 17:23:11 +02:00
debug.mk include: remove trailing whitespaces 2015-03-29 07:29:18 +00:00
depends.mk build: add missing wildcard for ignoring .pkgdir in dependency checks 2017-02-05 22:17:30 +01:00
device_table.txt
download.mk download.mk: enable DownloadMethod/github_archive 2018-07-05 01:30:57 +08:00
feeds.mk include/feeds.mk: fix distfeeds.conf without per-feed repos 2018-07-31 14:04:45 +02:00
hardened-ld-pie.specs build: add hardened builds with PIE (ASLR) support 2018-01-27 16:46:45 +01:00
hardening.mk build: fix ASLR for LTO packages 2018-07-30 14:26:16 +02:00
host-build.mk build: do not override CCACHE_DIR when ccache is disabled 2018-07-24 15:23:05 +02:00
image-commands.mk ath79: modify mtd partitions for Buffalo BHR-4GRV2 2018-11-26 12:28:17 +01:00
image-legacy.mk image: fix ar71xx legacy images 2017-07-15 07:02:59 +02:00
image.mk build: Introduce building of artifacts 2018-11-26 09:39:20 +01:00
kernel-build.mk include/kernel-build.mk: fix kernel rebuild on backport patch changes 2018-07-14 13:07:34 +02:00
kernel-defaults.mk config: don't define the same symbol twice 2018-01-17 11:07:17 +01:00
kernel-version.mk kernel: bump 3.18 to 3.18.126 2018-11-22 12:40:19 +01:00
kernel.mk build: remove obsolete -rc kernel testing rewrites 2018-10-20 16:13:39 +02:00
netfilter.mk Revert "netfilter: separate IPv6 relevant kernel modules from IPv4" 2018-08-06 19:46:37 +02:00
nls.mk treewide: fix build depends to refer to source package names 2018-01-13 19:54:44 +01:00
package-bin.mk build: use if-then to avoid non-zero return codes in bin/ packaging code 2017-01-23 13:49:45 +01:00
package-defaults.mk include/package-defaults.mk: fix default Build/Prepare with empty ./src 2018-03-07 09:59:08 +01:00
package-dumpinfo.mk include/package-dumpinfo.mk: don't duplicate source package information for every binary package 2018-01-13 19:54:45 +01:00
package-ipkg.mk build: fix compile error when a package includes itself in PROVIDES 2018-07-20 10:40:58 +02:00
package-seccomp.mk include: add a seccomp filter install wrapper 2015-03-26 10:57:56 +00:00
package.mk build: do not override CCACHE_DIR when ccache is disabled 2018-07-24 15:23:05 +02:00
prereq-build.mk build: remove GNU time dependency 2018-08-05 00:06:27 +02:00
prereq.mk include: extend SetupHostCommand macro to accept more arguments 2018-04-05 13:58:15 +02:00
quilt.mk kernel: split patches folder up into backport, pending and hack folders 2017-08-05 08:46:36 +02:00
rootfs.mk include/rootfs.mk: remove boot directory 2018-11-26 12:05:44 +01:00
scan.awk build: propagate override information to .packageinfo 2015-02-09 12:09:31 +00:00
scan.mk build: fix target metadata scan dependencies 2018-07-02 14:27:06 +02:00
scons.mk build: use CXXFLAGS if defined 2016-10-13 17:04:43 +02:00
shell.sh build: use mkhash to replace various quirky md5sum/openssl calls 2017-01-05 11:09:12 +01:00
subdir.mk build: remove GNU time dependency 2018-08-05 00:06:27 +02:00
target.mk hostapd: add basic variant 2018-10-16 15:07:41 +01:00
toolchain-build.mk build: stop overriding STAGING_DIR_HOST for toolchain build 2017-05-25 19:01:07 +02:00
toplevel.mk build: fix target metadata scan dependencies 2018-07-02 14:27:06 +02:00
u-boot.mk u-boot.mk: add HOST_LDFLAGS to UBOOT_MAKE_FLAGS 2018-02-10 20:52:31 +01:00
uclibc++.mk
unpack.mk build: unzip: perform operations quietly 2017-01-05 11:09:13 +01:00
verbose.mk include/verbose.mk: Add sc to failure message 2018-07-30 10:43:36 +02:00
version.mk base-files: fix HOME_URL replace 2018-08-02 07:54:40 +02:00