106 lines
4.1 KiB
Diff
106 lines
4.1 KiB
Diff
From 4f3ba90c37ec5aedd2227beb013bab59035fbb57 Mon Sep 17 00:00:00 2001
|
|
From: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
Date: Mon, 30 Sep 2019 19:20:26 +0300
|
|
Subject: [PATCH] mii: Add helpers for parsing SGMII auto-negotiation
|
|
|
|
Typically a MAC PCS auto-configures itself after it receives the
|
|
negotiated copper-side link settings from the PHY, but some MAC devices
|
|
are more special and need manual interpretation of the SGMII AN result.
|
|
|
|
In other cases, the PCS exposes the entire tx_config_reg base page as it
|
|
is transmitted on the wire during auto-negotiation, so it makes sense to
|
|
be able to decode the equivalent lp_advertised bit mask from the raw u16
|
|
(of course, "lp" considering the PCS to be the local PHY).
|
|
|
|
Therefore, add the bit definitions for the SGMII registers 4 and 5
|
|
(local device ability, link partner ability), as well as a link_mode
|
|
conversion helper that can be used to feed the AN results into
|
|
phy_resolve_aneg_linkmode.
|
|
|
|
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
---
|
|
include/linux/mii.h | 50 ++++++++++++++++++++++++++++++++++++++++++++++++
|
|
include/uapi/linux/mii.h | 12 ++++++++++++
|
|
2 files changed, 62 insertions(+)
|
|
|
|
--- a/include/linux/mii.h
|
|
+++ b/include/linux/mii.h
|
|
@@ -373,6 +373,56 @@ static inline u32 mii_lpa_to_ethtool_lpa
|
|
}
|
|
|
|
/**
|
|
+ * mii_lpa_mod_linkmode_adv_sgmii
|
|
+ * @lp_advertising: pointer to destination link mode.
|
|
+ * @lpa: value of the MII_LPA register
|
|
+ *
|
|
+ * A small helper function that translates MII_LPA bits to
|
|
+ * linkmode advertisement settings for SGMII.
|
|
+ * Leaves other bits unchanged.
|
|
+ */
|
|
+static inline void
|
|
+mii_lpa_mod_linkmode_lpa_sgmii(unsigned long *lp_advertising, u32 lpa)
|
|
+{
|
|
+ u32 speed_duplex = lpa & LPA_SGMII_DPX_SPD_MASK;
|
|
+
|
|
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, lp_advertising,
|
|
+ speed_duplex == LPA_SGMII_1000HALF);
|
|
+
|
|
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, lp_advertising,
|
|
+ speed_duplex == LPA_SGMII_1000FULL);
|
|
+
|
|
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, lp_advertising,
|
|
+ speed_duplex == LPA_SGMII_100HALF);
|
|
+
|
|
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, lp_advertising,
|
|
+ speed_duplex == LPA_SGMII_100FULL);
|
|
+
|
|
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, lp_advertising,
|
|
+ speed_duplex == LPA_SGMII_10HALF);
|
|
+
|
|
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, lp_advertising,
|
|
+ speed_duplex == LPA_SGMII_10FULL);
|
|
+}
|
|
+
|
|
+/**
|
|
+ * mii_lpa_to_linkmode_adv_sgmii
|
|
+ * @advertising: pointer to destination link mode.
|
|
+ * @lpa: value of the MII_LPA register
|
|
+ *
|
|
+ * A small helper function that translates MII_ADVERTISE bits
|
|
+ * to linkmode advertisement settings when in SGMII mode.
|
|
+ * Clears the old value of advertising.
|
|
+ */
|
|
+static inline void mii_lpa_to_linkmode_lpa_sgmii(unsigned long *lp_advertising,
|
|
+ u32 lpa)
|
|
+{
|
|
+ linkmode_zero(lp_advertising);
|
|
+
|
|
+ mii_lpa_mod_linkmode_lpa_sgmii(lp_advertising, lpa);
|
|
+}
|
|
+
|
|
+/**
|
|
* mii_adv_mod_linkmode_adv_t
|
|
* @advertising:pointer to destination link mode.
|
|
* @adv: value of the MII_ADVERTISE register
|
|
--- a/include/uapi/linux/mii.h
|
|
+++ b/include/uapi/linux/mii.h
|
|
@@ -131,6 +131,18 @@
|
|
#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */
|
|
#define NWAYTEST_RESV2 0xfe00 /* Unused... */
|
|
|
|
+/* MAC and PHY tx_config_Reg[15:0] for SGMII in-band auto-negotiation.*/
|
|
+#define ADVERTISE_SGMII 0x0001 /* MAC can do SGMII */
|
|
+#define LPA_SGMII 0x0001 /* PHY can do SGMII */
|
|
+#define LPA_SGMII_DPX_SPD_MASK 0x1C00 /* SGMII duplex and speed bits */
|
|
+#define LPA_SGMII_10HALF 0x0000 /* Can do 10mbps half-duplex */
|
|
+#define LPA_SGMII_10FULL 0x1000 /* Can do 10mbps full-duplex */
|
|
+#define LPA_SGMII_100HALF 0x0400 /* Can do 100mbps half-duplex */
|
|
+#define LPA_SGMII_100FULL 0x1400 /* Can do 100mbps full-duplex */
|
|
+#define LPA_SGMII_1000HALF 0x0800 /* Can do 1000mbps half-duplex */
|
|
+#define LPA_SGMII_1000FULL 0x1800 /* Can do 1000mbps full-duplex */
|
|
+#define LPA_SGMII_LINK 0x8000 /* PHY link with copper-side partner */
|
|
+
|
|
/* 1000BASE-T Control register */
|
|
#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */
|
|
#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */
|