mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-12 09:54:53 +00:00
597 lines
9.7 KiB
Plaintext
597 lines
9.7 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
|
|
/*
|
|
* Copyright (c) 2017 MediaTek Inc.
|
|
* Author: Ming Huang <ming.huang@mediatek.com>
|
|
* Sean Wang <sean.wang@mediatek.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
#include "mt7622.dtsi"
|
|
#include "mt6380.dtsi"
|
|
|
|
/ {
|
|
model = "Elecom WRC-2533";
|
|
compatible = "elecom,wrc-2533gent", "mediatek,mt7622";
|
|
|
|
aliases {
|
|
led-boot = &led_power;
|
|
led-failsafe = &led_power;
|
|
led-running = &led_power;
|
|
led-upgrade = &led_power;
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512 console=ttyS0,115200n8";
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
proc-supply = <&mt6380_vcpu_reg>;
|
|
sram-supply = <&mt6380_vm_reg>;
|
|
};
|
|
|
|
cpu@1 {
|
|
proc-supply = <&mt6380_vcpu_reg>;
|
|
sram-supply = <&mt6380_vm_reg>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
poll-interval = <100>;
|
|
|
|
wps {
|
|
label = "wps";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
factory {
|
|
label = "factory";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&pio 102 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
switch0 {
|
|
label = "switch0";
|
|
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_0>;
|
|
linux,input-type = <EV_SW>;
|
|
};
|
|
|
|
switch1 {
|
|
label = "switch1";
|
|
gpios = <&pio 16 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_1>;
|
|
linux,input-type = <EV_SW>;
|
|
};
|
|
|
|
switch2 {
|
|
label = "switch2";
|
|
gpios = <&pio 17 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_2>;
|
|
linux,input-type = <EV_SW>;
|
|
};
|
|
|
|
switch3 {
|
|
label = "switch3";
|
|
gpios = <&pio 18 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_3>;
|
|
linux,input-type = <EV_SW>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_power: power_g {
|
|
label = "wrc-2533:green:power";
|
|
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
power_b {
|
|
label = "wrc-2533:blue:power";
|
|
gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
power_r {
|
|
label = "wrc-2533:red:power";
|
|
gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
usb {
|
|
label = "wrc-2533:blue:usb";
|
|
gpios = <&pio 74 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wps {
|
|
label = "wrc-2533:red:wps";
|
|
gpios = <&pio 76 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wifi2 {
|
|
label = "wrc-2533:blue:wifi2g";
|
|
gpios = <&pio 85 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wifi5 {
|
|
label = "wrc-2533:blue:wifi5g";
|
|
gpios = <&pio 91 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
reg_usb_vbus: regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&pio 22 GPIO_ACTIVE_LOW>;
|
|
enable-active-high;
|
|
};
|
|
|
|
memory {
|
|
reg = <0 0x40000000 0 0x3F000000>;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
rtkgsw: rtkgsw@0 {
|
|
compatible = "mediatek,rtk-gsw";
|
|
mediatek,ethsys = <ðsys>;
|
|
mediatek,mdio = <&mdio>;
|
|
mediatek,reset-pin = <&pio 54 0>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&pcie0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&slot0 {
|
|
mt7615@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
mediatek,mtd-eeprom = <&factory 0x05000>;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
/* eMMC is shared pin with parallel NAND */
|
|
emmc_pins_default: emmc-pins-default {
|
|
mux {
|
|
function = "emmc", "emmc_rst";
|
|
groups = "emmc";
|
|
};
|
|
|
|
/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
|
|
* "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
|
|
* DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
|
|
*/
|
|
conf-cmd-dat {
|
|
pins = "NDL0", "NDL1", "NDL2",
|
|
"NDL3", "NDL4", "NDL5",
|
|
"NDL6", "NDL7", "NRB";
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
conf-clk {
|
|
pins = "NCLE";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
emmc_pins_uhs: emmc-pins-uhs {
|
|
mux {
|
|
function = "emmc";
|
|
groups = "emmc";
|
|
};
|
|
|
|
conf-cmd-dat {
|
|
pins = "NDL0", "NDL1", "NDL2",
|
|
"NDL3", "NDL4", "NDL5",
|
|
"NDL6", "NDL7", "NRB";
|
|
input-enable;
|
|
drive-strength = <4>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
conf-clk {
|
|
pins = "NCLE";
|
|
drive-strength = <4>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
eth_pins: eth-pins {
|
|
mux {
|
|
function = "eth";
|
|
groups = "mdc_mdio", "rgmii_via_gmac2";
|
|
};
|
|
};
|
|
|
|
i2c1_pins: i2c1-pins {
|
|
mux {
|
|
function = "i2c";
|
|
groups = "i2c1_0";
|
|
};
|
|
};
|
|
|
|
i2c2_pins: i2c2-pins {
|
|
mux {
|
|
function = "i2c";
|
|
groups = "i2c2_0";
|
|
};
|
|
};
|
|
|
|
i2s1_pins: i2s1-pins {
|
|
mux {
|
|
function = "i2s";
|
|
groups = "i2s_out_mclk_bclk_ws",
|
|
"i2s1_in_data",
|
|
"i2s1_out_data";
|
|
};
|
|
|
|
conf {
|
|
pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
|
|
"I2S_WS", "I2S_MCLK";
|
|
drive-strength = <12>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
irrx_pins: irrx-pins {
|
|
mux {
|
|
function = "ir";
|
|
groups = "ir_1_rx";
|
|
};
|
|
};
|
|
|
|
irtx_pins: irtx-pins {
|
|
mux {
|
|
function = "ir";
|
|
groups = "ir_1_tx";
|
|
};
|
|
};
|
|
|
|
/* Parallel nand is shared pin with eMMC */
|
|
parallel_nand_pins: parallel-nand-pins {
|
|
mux {
|
|
function = "flash";
|
|
groups = "par_nand";
|
|
};
|
|
};
|
|
|
|
pcie0_pins: pcie0-pins {
|
|
mux {
|
|
function = "pcie";
|
|
groups = "pcie0_pad_perst",
|
|
"pcie0_1_waken",
|
|
"pcie0_1_clkreq";
|
|
};
|
|
};
|
|
|
|
pcie1_pins: pcie1-pins {
|
|
mux {
|
|
function = "pcie";
|
|
groups = "pcie1_pad_perst",
|
|
"pcie1_0_waken",
|
|
"pcie1_0_clkreq";
|
|
};
|
|
};
|
|
|
|
pmic_bus_pins: pmic-bus-pins {
|
|
mux {
|
|
function = "pmic";
|
|
groups = "pmic_bus";
|
|
};
|
|
};
|
|
|
|
pwm7_pins: pwm1-2-pins {
|
|
mux {
|
|
function = "pwm";
|
|
groups = "pwm_ch7_2";
|
|
};
|
|
};
|
|
|
|
wled_pins: wled-pins {
|
|
mux {
|
|
function = "led";
|
|
groups = "wled";
|
|
};
|
|
};
|
|
|
|
sd0_pins_default: sd0-pins-default {
|
|
mux {
|
|
function = "sd";
|
|
groups = "sd_0";
|
|
};
|
|
|
|
/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
|
|
* "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
|
|
* DAT2, DAT3, CMD, CLK for SD respectively.
|
|
*/
|
|
conf-cmd-data {
|
|
pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
|
|
"I2S2_IN","I2S4_OUT";
|
|
input-enable;
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
conf-clk {
|
|
pins = "I2S3_OUT";
|
|
drive-strength = <12>;
|
|
bias-pull-down;
|
|
};
|
|
conf-cd {
|
|
pins = "TXD3";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sd0_pins_uhs: sd0-pins-uhs {
|
|
mux {
|
|
function = "sd";
|
|
groups = "sd_0";
|
|
};
|
|
|
|
conf-cmd-data {
|
|
pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
|
|
"I2S2_IN","I2S4_OUT";
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
conf-clk {
|
|
pins = "I2S3_OUT";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
/* Serial NAND is shared pin with SPI-NOR */
|
|
serial_nand_pins: serial-nand-pins {
|
|
mux {
|
|
function = "flash";
|
|
groups = "snfi";
|
|
};
|
|
};
|
|
|
|
spic0_pins: spic0-pins {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spic0_0";
|
|
};
|
|
};
|
|
|
|
spic1_pins: spic1-pins {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spic1_0";
|
|
};
|
|
};
|
|
|
|
/* SPI-NOR is shared pin with serial NAND */
|
|
spi_nor_pins: spi-nor-pins {
|
|
mux {
|
|
function = "flash";
|
|
groups = "spi_nor";
|
|
};
|
|
};
|
|
|
|
/* serial NAND is shared pin with SPI-NOR */
|
|
serial_nand_pins: serial-nand-pins {
|
|
mux {
|
|
function = "flash";
|
|
groups = "snfi";
|
|
};
|
|
};
|
|
|
|
uart0_pins: uart0-pins {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart0_0_tx_rx" ;
|
|
};
|
|
};
|
|
|
|
uart2_pins: uart2-pins {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart2_1_tx_rx" ;
|
|
};
|
|
};
|
|
|
|
watchdog_pins: watchdog-pins {
|
|
mux {
|
|
function = "watchdog";
|
|
groups = "watchdog";
|
|
};
|
|
};
|
|
};
|
|
|
|
&btif {
|
|
status = "disabled";
|
|
};
|
|
|
|
&cir {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&irrx_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ð_pins>;
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "sgmii";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
phy-mode = "rgmii";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm7_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwrap {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_bus_pins>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&snand {
|
|
mediatek,quad-spi;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&serial_nand_pins>;
|
|
status = "okay";
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "Preloader";
|
|
reg = <0x00000 0x0080000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "ATF";
|
|
reg = <0x80000 0x0040000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@c0000 {
|
|
label = "uboot";
|
|
reg = <0xc0000 0x0080000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@140000 {
|
|
label = "uboot-env";
|
|
reg = <0x140000 0x0080000>;
|
|
read-only;
|
|
};
|
|
|
|
factory: partition@1c0000 {
|
|
label = "factory";
|
|
reg = <0x1c0000 0x0040000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "firmware";
|
|
reg = <0x200000 0x2000000>;
|
|
};
|
|
|
|
partition@2200000 {
|
|
label = "reserved";
|
|
reg = <0x2200000 0x4000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spic0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spic1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_usb_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&watchdog_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wmac {
|
|
mediatek,mtd-eeprom = <&factory 0x0000>;
|
|
status = "okay";
|
|
};
|