openwrt

OpenWrt Source Repository

Go to file

Jo-Philipp Wich 1a6ccdc0cf patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that SVN-Revision: 29948		2012-01-29 20:19:06 +00:00
docs	…
include	autotools.mk: fix autoreconf in subdirectories, thanks field_it for spotting this	2012-01-20 21:31:03 +00:00
package	switch: fix some memory leaks in switch_parse_vlan()	2012-01-28 13:52:37 +00:00
scripts	patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that	2012-01-29 20:19:06 +00:00
target	add default and Sim.One profiles	2012-01-29 15:00:36 +00:00
toolchain	eglibc 2.14 needs our eglibc patchset as well	2012-01-21 19:39:37 +00:00
tools	autoconf: another relocatability fix for autom4te, substitute hardcoded prefix with $STAGING_DIR when reading autom4te.cfg	2012-01-28 04:42:15 +00:00
.gitignore	…
BSDmakefile	…
Config.in	if CONFIG_BUILD_NLS is selected, compile uClibc with locale support	2012-01-01 15:11:11 +00:00
LICENSE	…
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
rules.mk	use ext-toolchain.sh to integrate external toolchains Use ext-toolchain.sh to wrap external toolchain commands, abort build if certain features such as CONFIG_SOFT_FLOAT or CONFIG_IPV6 are enabled but not supported by the toolchain.	2012-01-18 03:08:09 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org