RepoMirrors
/
openwrt
mirror of git://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
OpenWrt Source Repository
53,968 Commits 9 Branches 72 Tags 245 MiB
C 61.6%
Makefile 19.3%
Shell 6.8%
Roff 6.7%
Perl 2.5%
Other 3%
Go to file
Thibaut VARÈNE 158a5af801
ramips: improve YunCore AX820 LEDs 
At least two AX820 hardware variants are known to exist, but they cannot
be distinguished (same hardware revision, no specific markings).

They appear to have the same LED hardware, but wired differently:

- One has a red system LED at GPIO 15, a green wlan2g LED at GPIO 14 and
  a blue wlan5g LED at GPIO 16;
- The other only offers a green system LED at GPIO 15, with GPIO 14 and
  16 being apparently not connected

Finally, a Yuncore datasheet says the canonical wiring should be:
- Blue wlan2g GPIO 14, green system GPIO 15, red wlan5g GPIO 16

All GPIOs are tied to a single RGB LED which is exposed via lightpipe on
the device front casing.

Considering the above, this patch exposes all three LEDs, preserves the
common system LED (GPIO 15) as the openwrt status LED, and removes the
color information from the LEDs names since it is not consistent across
hardware. The LED naming is made consistent with other YunCore devices.
A note is added in DTS to ensure this information is always available
and prevent unwanted changes in the future.

Fixes: #10131 "YunCore AX820: GPIO LED not correct"

Reviewed-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
 		2022-07-01 20:58:16 +02:00
.github CI: move logs/ to GITHUB_WORKSPACE 2022-03-09 14:24:49 +01:00
LICENSES
…
config config: build: cleanup whitespace issue 2022-02-19 13:10:01 +01:00
include kernel: bump 5.10 to 5.10.127 2022-07-01 20:28:35 +02:00
package ipq-wifi: remove packaged BDF-s for MikroTik devices 2022-07-01 12:46:45 +02:00
scripts scripts/gen_image_generic.sh: fix order of files in EFI bootfs 2022-04-15 14:12:13 +01:00
target ramips: improve YunCore AX820 LEDs 2022-07-01 20:58:16 +02:00
toolchain toolchain: Update glibc 2.34 to recent HEAD 2022-04-19 21:51:06 +02:00
tools tools/libressl: update to version 3.4.3 2022-06-25 00:05:21 +02:00
.gitattributes
…
.gitignore
…
BSDmakefile
…
COPYING
…
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
Makefile build: don't remove BUILD_LOG_DIR in _clean 2022-05-01 13:23:12 +02:00
README.md
…
feeds.conf.default OpenWrt v22.03.0-rc4: revert to branch defaults 2022-06-10 21:37:09 +02:00
rules.mk build: change PYTHON to python3 2022-01-24 13:29:05 +01:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.6+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0