RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2025-01-16 03:41:00 +00:00
Code Issues Packages Projects Releases Wiki Activity
OpenWrt Source Repository
46,084 Commits 9 Branches 77 Tags 243 MiB
C 61.1%
Makefile 19.3%
Shell 6.9%
Roff 6.7%
Perl 2.5%
Other 3.3%
157e17e985
Go to file
Stijn Tintel 157e17e985 ath79: add support for Ubiquiti LiteBeam AC Gen2 
Hardware:
* SoC: Atheros AR9342-BL1A
* RAM: 64MB DDR2 (Winbond W9751G6KB-25)
* Flash: 16MB SPI NOR (Macronix MX25L12835FZ2I-10G)
* Ethernet: 1x 10/100/1000 Mbps (Atheros AR8035-A) with 24V PoE support
* Wifi 2.4GHz: Atheros AR9340 v2
* WiFi 5GHz: Ubiquiti U-AME-G1-BR4A (rebranded QCA988X v2)
* LEDs: 1x Power, 1x Ethernet
* Buttons: 1x Reset
* UART: 1x TTL 115200n8, 3.3V RX TX GND, 3.3V pin closest to RJ45 port

The LEDs do not seem to be connected to any GPIO, so there is currently
no way to control them.

Installation via U-Boot, TFTP and serial console:
* Configure your TFTP server with IP 192.168.1.254
* Connect serial console and power up the device
* Hit any key to stop autoboot
* tftpboot 0x81000000 openwrt-ath79-generic-ubnt_litebeam-ac-gen2-initramfs-kernel.bin
* bootm 0x81000000
* copy openwrt-ath79-generic-ubnt_litebeam-ac-gen2-squashfs-sysupgrade.bin
  to /tmp
* sysupgrade /tmp/openwrt-ath79-generic-ubnt_litebeam-ac-gen2-squashfs-sysupgrade.bin

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Petr Štetiar <ynezz@true.cz>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-04 23:17:41 +02:00
.github
config config: kernel: fix typo in HFSPLUG_FS_POSIX_ACL 2019-11-28 02:02:17 +02:00
include kernel: bump 4.9 to 4.9.205 2019-11-29 17:05:38 +01:00
package gre: add ipv6 parameter to gre interfaces 2019-12-02 21:52:33 +01:00
scripts scripts/dl_github_archive.py: fix python3 str, bytes confusion 2019-11-04 11:11:19 +00:00
target ath79: add support for Ubiquiti LiteBeam AC Gen2 2019-12-04 23:17:41 +02:00
toolchain glibc: backport fix for regexec buffer read overrun 2019-11-30 00:53:36 +01:00
tools tools: tplink-safeloader: fix whitespace issues 2019-11-27 22:54:36 +01:00
.gitattributes
.gitignore gitignore: ignore patches in OpenWrt root directory 2019-11-06 00:27:55 +01:00
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile build: add buildinfo as single Makefile target 2019-10-17 14:01:33 +02:00
README build: switch to Python 3 2019-07-26 08:09:16 +02:00
rules.mk rules.mk: remove "$(STAGING_DIR)/include" 2019-11-02 20:51:56 +01:00

README 

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org