OpenWrt Source Repository
Go to file
Gabor Juhos 0ffe21c792 ar71xx: Support for Mikrotik RB2011UiAS
The RB2011UiAS is almost exactly the same as the RB2011UAS, which is
already supported. Hardware-wise, it adds a passive power injector on
Eth10. Software-wise, Routerboot passes a different board name on the
kernel command line. Hence the need for a patch.

Not yet working:

* touchscreen: doesn't work on RB2011UAS either. The touchscreen itself
  seems to be driven by an ADS7843-compatible IC, but figuring out which
  GPIO pins it's connected to is work for the future.
* control of power injector: remains off. Probably also GPIO-controlled.

Signed-off-by: Soren Harward <stharward@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5841/
[juhosg: rename and refresh the kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41617
2014-07-13 16:25:58 +00:00
config config/Config-images.in: enable zlib as the default ubi compression 2014-06-24 18:14:05 +00:00
docs
include kernel: update 3.14 to 3.14.12 2014-07-11 13:28:44 +00:00
package base-files: adjust the default netfilter tcp established connection timeout as per RFC 5382 (#17098) 2014-07-13 10:24:34 +00:00
scripts scripts/abs2rel.pl: remove, it is unused 2014-07-04 12:11:40 +00:00
target ar71xx: Support for Mikrotik RB2011UiAS 2014-07-13 16:25:58 +00:00
toolchain toolchain: switch back to uClibc for octeon, it actually works now 2014-07-10 20:48:31 +00:00
tools b43-tools: b43-fwsquash.py: manually remove LP-PHY 16 support 2014-07-12 15:41:50 +00:00
.gitattributes
.gitignore add git-src to .gitignore 2014-01-12 12:06:39 +00:00
BSDmakefile
Config.in move menuconfig options into separate files 2013-11-22 14:30:40 +00:00
feeds.conf.default feeds.conf.default: add management feed 2014-06-12 15:08:08 +00:00
LICENSE
Makefile build: remove duplicate variable definitions 2014-03-21 15:54:11 +00:00
README build: BSD compile fixes 2013-03-07 17:32:29 +00:00
rules.mk partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk" 2014-03-22 19:52:48 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org