192 lines
5.8 KiB
Diff
192 lines
5.8 KiB
Diff
diff -Naur linux-2.6.19.1/arch/arm/boot/compressed/head-at91rm9200.S linux/arch/arm/boot/compressed/head-at91rm9200.S
|
|
--- linux-2.6.19.1/arch/arm/boot/compressed/head-at91rm9200.S 2006-12-11 20:32:53.000000000 +0100
|
|
+++ linux/arch/arm/boot/compressed/head-at91rm9200.S 2007-01-20 10:26:21.000000000 +0100
|
|
@@ -61,6 +61,12 @@
|
|
cmp r7, r3
|
|
beq 99f
|
|
|
|
+ @ FDL Versalink : 1053
|
|
+ mov r3, #(MACH_TYPE_VLINK & 0xff)
|
|
+ orr r3, r3, #(MACH_TYPE_VLINK & 0xff00)
|
|
+ cmp r7, r3
|
|
+ beq 99f
|
|
+
|
|
@ Ajeco 1ARM : 1075
|
|
mov r3, #(MACH_TYPE_ONEARM & 0xff)
|
|
orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
|
|
diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/board-vlink.c linux/arch/arm/mach-at91rm9200/board-vlink.c
|
|
--- linux-2.6.19.1/arch/arm/mach-at91rm9200/board-vlink.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux/arch/arm/mach-at91rm9200/board-vlink.c 2007-01-19 21:18:00.000000000 +0100
|
|
@@ -0,0 +1,144 @@
|
|
+/*
|
|
+ * linux/arch/arm/mach-at91rm9200/board-ek.c
|
|
+ *
|
|
+ * Copyright (C) 2006,2007 Hamish Guthrie
|
|
+ * Guthrie Consulting.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spi/spi.h>
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+#include <asm/mach/irq.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+
|
|
+#include "generic.h"
|
|
+
|
|
+
|
|
+/*
|
|
+ * Serial port configuration.
|
|
+ * 0 .. 3 = USART0 .. USART3
|
|
+ * 4 = DBGU
|
|
+ */
|
|
+static struct at91_uart_config __initdata vlink_uart_config = {
|
|
+ .console_tty = 0, /* ttyS0 */
|
|
+ .nr_tty = 5,
|
|
+ .tty_map = { 4, 1, 0, 3, 2 } /* ttyS0, ..., ttyS4 */
|
|
+};
|
|
+
|
|
+static void __init vlink_map_io(void)
|
|
+{
|
|
+ /* Initialize processor: 18.432 MHz crystal */
|
|
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
|
|
+
|
|
+ /* Setup the LEDs */
|
|
+// at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
|
|
+
|
|
+ /* Setup the serial ports and console */
|
|
+ at91_init_serial(&vlink_uart_config);
|
|
+}
|
|
+
|
|
+static void __init vlink_init_irq(void)
|
|
+{
|
|
+ at91rm9200_init_interrupts(NULL);
|
|
+}
|
|
+
|
|
+static struct eth_platform_data __initdata vlink_eth_data = {
|
|
+ .phy_irq_pin = AT91_PIN_PC4,
|
|
+ .is_rmii = 1,
|
|
+};
|
|
+
|
|
+static struct at91_usbh_data __initdata vlink_usbh_data = {
|
|
+ .ports = 1,
|
|
+};
|
|
+
|
|
+static struct at91_udc_data __initdata vlink_udc_data = {
|
|
+ .vbus_pin = AT91_PIN_PD4,
|
|
+ .pullup_pin = AT91_PIN_PD5,
|
|
+};
|
|
+
|
|
+/*static struct at91_mmc_data __initdata ek_mmc_data = {
|
|
+ .det_pin = AT91_PIN_PB27,
|
|
+ .is_b = 0,
|
|
+ .wire4 = 1,
|
|
+ .wp_pin = AT91_PIN_PA17,
|
|
+};
|
|
+*/
|
|
+
|
|
+static struct spi_board_info vlink_spi_devices[] = {
|
|
+ { /* DataFlash chip */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 0,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ },
|
|
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
|
|
+ { /* DataFlash card */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 3,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ },
|
|
+#endif
|
|
+};
|
|
+
|
|
+static void __init vlink_board_init(void)
|
|
+{
|
|
+ /* Serial */
|
|
+ at91_add_device_serial();
|
|
+ /* Ethernet */
|
|
+ at91_add_device_eth(&vlink_eth_data);
|
|
+ /* USB Host */
|
|
+ at91_add_device_usbh(&vlink_usbh_data);
|
|
+ /* USB Device */
|
|
+ at91_add_device_udc(&vlink_udc_data);
|
|
+ at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
|
|
+ /* I2C */
|
|
+ at91_add_device_i2c();
|
|
+ /* SPI */
|
|
+ at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices));
|
|
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
|
|
+ /* DataFlash card */
|
|
+// at91_set_gpio_output(AT91_PIN_PB22, 0);
|
|
+#else
|
|
+ /* MMC */
|
|
+// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
|
|
+// at91_add_device_mmc(&vlink_mmc_data);
|
|
+#endif
|
|
+ /* VGA */
|
|
+}
|
|
+
|
|
+MACHINE_START(VLINK, "FDL VersaLink")
|
|
+ /* Maintainer: Guthrie Consulting */
|
|
+ .phys_io = AT91_BASE_SYS,
|
|
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
|
+ .boot_params = AT91_SDRAM_BASE + 0x100,
|
|
+ .timer = &at91rm9200_timer,
|
|
+ .map_io = vlink_map_io,
|
|
+ .init_irq = vlink_init_irq,
|
|
+ .init_machine = vlink_board_init,
|
|
+MACHINE_END
|
|
diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/Kconfig linux/arch/arm/mach-at91rm9200/Kconfig
|
|
--- linux-2.6.19.1/arch/arm/mach-at91rm9200/Kconfig 2006-12-11 20:32:53.000000000 +0100
|
|
+++ linux/arch/arm/mach-at91rm9200/Kconfig 2007-01-19 21:17:49.000000000 +0100
|
|
@@ -82,6 +82,12 @@
|
|
help
|
|
Select this if you are using Sperry-Sun's KAFA board.
|
|
|
|
+config MACH_VLINK
|
|
+ bool "Figment Design Labs VersaLink"
|
|
+ depends on ARCH_AT91RM9200
|
|
+ help
|
|
+ Select this if you are using FDL's VersaLink board
|
|
+
|
|
endif
|
|
|
|
# ----------------------------------------------------------
|
|
diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/Makefile linux/arch/arm/mach-at91rm9200/Makefile
|
|
--- linux-2.6.19.1/arch/arm/mach-at91rm9200/Makefile 2006-12-11 20:32:53.000000000 +0100
|
|
+++ linux/arch/arm/mach-at91rm9200/Makefile 2007-01-19 21:17:42.000000000 +0100
|
|
@@ -24,6 +24,7 @@
|
|
obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
|
|
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
|
|
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
|
|
+obj-$(CONFIG_MACH_VLINK) += board-vlink.o
|
|
|
|
# AT91SAM9260 board-specific support
|
|
|