openwrt/target/linux
Petr Štetiar 0f8cdc28af ar71xx: Add support for Ubiquity Bullet M (XW)
CPU: AR9342 SoC
RAM:     64 MB DDR2
Flash:    8 MB NOR SPI
Ports:  100 MBit (24V PoE in)
WLAN: 2.4/5 GHz
UART:     1 UART on PCB marked as J1 with 115200 8N1 config
LEDs:       Power, Ethernet, 4x RSSI LEDs (orange, red, 2x green)
Buttons:    Reset

UART connection details

  .---------------------------------.
  |                                 |
[ETH]          J1                 [ANT]
  |    o VCC o RX o TX o GND        |
  `---------------------------------'

Flashing instructions using recovery method over TFTP

 1. Unplug the ethernet cable from the router.
 2. Using paper clip press and hold the router's reset button. Make sure
    you can feel it depressed by the paper clip. Do not release the button
    until step 4.
 3. While keeping the reset button pressed in, plug the ethernet cable
    back into the AP. Keep the reset button depressed until you see the
    device's LEDs flashing in upgrade mode (alternating LED1/LED3 and
    LED2/LED4), this may take up to 25 seconds.
 4. You may release the reset button, now the device should be in TFTP
    transfer mode.
 5. Set a static IP on your Computer's NIC. A static IP of 192.168.1.25/24
    should work.
 6. Plug the PoE injector's LAN cable directly to your computer.
 7. Start tftp client and issue following commands:
     tftp> binary
     tftp> connect 192.168.1.20
     tftp> put openwrt-ar71xx-generic-ubnt-bullet-m-xw-squashfs-factory.bin

Tested only on Bullet M2HP.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-04-08 18:37:04 +02:00
..
adm5120
adm8668
apm821xx kernel: bump 4.19 to 4.19.34 2019-04-08 14:53:39 +02:00
ar7
ar71xx ar71xx: Add support for Ubiquity Bullet M (XW) 2019-04-08 18:37:04 +02:00
arc770
archs38
armvirt
at91
ath25
ath79 kernel: bump 4.19 to 4.19.34 2019-04-08 14:53:39 +02:00
au1000
bcm53xx kernel: bump 4.19 to 4.19.34 2019-04-08 14:53:39 +02:00
brcm47xx kernel: bump 4.19 to 4.19.34 2019-04-08 14:53:39 +02:00
brcm63xx
brcm2708 kernel: bump 4.14 to 4.14.111 2019-04-08 14:53:39 +02:00
cns3xxx kernel: bump 4.19 to 4.19.34 2019-04-08 14:53:39 +02:00
gemini kernel: bump 4.19 to 4.19.34 2019-04-08 14:53:39 +02:00
generic kernel: bump 4.19 to 4.19.34 2019-04-08 14:53:39 +02:00
imx6 imx6: Add support for Toradex Apalis family of CoMs 2019-04-08 18:37:04 +02:00
ipq40xx ipq40xx: essedma: Add fix for memory allocation issues 2019-03-24 21:17:41 +01:00
ipq806x kernel: bump 4.14 to 4.14.108 2019-03-27 10:48:59 +01:00
ixp4xx
kirkwood kernel: bump 4.14 to 4.14.108 2019-03-27 10:48:59 +01:00
lantiq
layerscape kernel: bump 4.14 to 4.14.111 2019-04-08 14:53:39 +02:00
malta
mcs814x
mediatek
mpc85xx kernel: bump 4.14 to 4.14.110 2019-04-08 12:07:28 +02:00
mvebu mvebu: sysupgrade: sdcard: keep user added partitons 2019-04-06 16:31:10 +02:00
mxs
octeon kernel: bump 4.19 to 4.19.34 2019-04-08 14:53:39 +02:00
octeontx
omap
omap24xx
orion
oxnas kernel: bump 4.14 to 4.14.108 2019-03-27 10:48:59 +01:00
pistachio
ppc40x
ppc44x
ramips ramips: correct DTS for Belkin F9K1109v1 to include switch definition 2019-04-06 19:14:06 +02:00
rb532
samsung
sunxi kernel: bump 4.19 to 4.19.34 2019-04-08 14:53:39 +02:00
tegra tegra: add kernel 4.19 support 2019-04-06 14:48:46 +02:00
uml
x86
xburst
zynq zynq: replace storage related configs by packages 2019-04-06 16:31:10 +02:00
Makefile