RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-29 01:52:21 +00:00
Code Issues Packages Projects Releases Wiki Activity
OpenWrt Source Repository
36,321 Commits 10 Branches 76 Tags 240 MiB
C 61.2%
Makefile 19.3%
Shell 6.8%
Roff 6.7%
Perl 2.5%
Other 3.4%
098f7156cc
Go to file
Christian Lamparter 098f7156cc ar71xx: add support for the Airtight C-60 
This patch adds support for the Airtight C-60.

SOC:	Atheros AR9344 rev 2 (CPU:560.000MHz)
RAM:	128 MiB
NOR:	MX25L3205D 4MiB
NAND:	ST Micro NAND 32MiB 3,3V 8-bit
SW-NET:	AR8327N (2 Ports)
WLAN1:	Dual-Band AR9340 Rev:2 (built-in SoC)
WLAN2:	Dual-Band AR9300 Rev:4 PCIe Chip

The switch is setup for an accesspoint:
	LAN1: (gigabit) is the wan-port.
	LAN2: (fast ethernet) is bridged with the br-lan.

Flashing Guide (via initramfs):
  1. Connect a PC to the serial port of the C-60.
     power up the C-60.

     Enter u-boot command prompt:
     #> nand erase
     #> setenv bootcmd "bootm 0x9f060000"
     #> saveenv
     #> setenv ipaddr 192.168.1.1
     #> setenv netmask 255.255.255.0
     #> setenv serverip 192.168.1.100
     #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin
     #> tftpboot
     #> bootm

  2. Wait for the C-60 to boot LEDE.
     On the root prompt. Enter:
     # ubiformat /dev/mtd4
     # ubiattach -p /dev/mtd4

  3. After that copy the sysupgrade.tar onto the router and run:
     # sysupgrade sysupgrade.tar

     to flash the image.

Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided
a C-60 unit and he helped with debugging the switch, LEDs and platfrom
support.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-10-15 11:36:50 +02:00
.github Add Issue submission template (redirect to bugs.lede-project.org) 2016-09-01 09:01:04 -04:00
config config: enable shadow passwords unconditionally 2016-09-26 17:57:56 +02:00
docs
include autotools: use correct version for gettext FIXUP 2016-10-13 20:25:42 +02:00
package mbedtls: enable NIST curves optimisation. 2016-10-13 20:25:42 +02:00
scripts scripts/diffconfig.sh: fix output if TARGET_PER_DEVICE_ROOTFS is set 2016-10-06 22:00:10 +02:00
target ar71xx: add support for the Airtight C-60 2016-10-15 11:36:50 +02:00
toolchain toolchain/binutils: Add binutils 2.27 2016-10-13 17:05:25 +02:00
tools tools: add missing dependency for dosfstools 2016-10-12 12:25:27 +02:00
.gitattributes
.gitignore
BSDmakefile
Config.in branding: add LEDE branding 2016-03-24 22:40:13 +01:00
feeds.conf.default feeds: switch from github to lede-project.org mirrors 2016-08-01 22:34:18 +02:00
LICENSE
Makefile build: move merged package directory from bin/ to staging_dir 2016-08-03 12:22:18 +02:00
README README: Update project README 2016-05-12 03:29:36 +02:00
rules.mk build: add checksum target 2016-08-01 18:11:21 +02:00

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org